Text only | Text with Images

SAAC Forum

The Cars => 1967 Shelby GT350/500 => Topic started by: davez on March 11, 2018, 02:23:55 PM

Title: 350 radiator
Post by: davez on March 11, 2018, 02:23:55 PM
Does any one know the width of a 4 speed 350 radiator? Did they use the bolt on side baffles to fill the gap iin the radiator support opening?
dz
Title: Re: 350 radiator
Post by: BGlover67 on March 11, 2018, 02:40:59 PM
Yes, they used side plates.

Title: Re: 350 radiator
Post by: davez on March 11, 2018, 03:37:06 PM
Thanks Brian
That should make it 20.5 to 21 inches wide
Is this what ford considers heavy duty cooling
Title: Re: 350 radiator
Post by: Bigfoot on March 11, 2018, 06:33:55 PM
Seen plenty of guys put in a B.B. rad for these cars.
Title: Re: 350 radiator
Post by: Bob Gaines on March 11, 2018, 07:46:29 PM
Quote from: Bigfoot on March 11, 2018, 06:33:55 PM
Seen plenty of guys put in a B.B. rad for these cars.
Probably seen instead the 68/69 302/351 extra cooling radiator (with A/C) IMO which is a easier switch . They look the same relativity speaking to the 67 BB radiator.  BB radiator you would have to deal with lower hose mismatch which is much harder then dealing with switching lower radiator brackets. Just my guess.
Title: Re: 350 radiator
Post by: roddster on March 12, 2018, 10:36:02 AM
"C'mon...."  How about the part number info, and the Modine letter info, and the stick or auto info.  Gotta ask as this is the Forum rebuilding period.
Text only | Text with Images