Anyone know of a reputable rebuilder? I would like to get my C6OE-A water pump rebuilt. I am in California, but not opposed to shipping out of state.
Thanks,
Greek
Wade Jenezson at the "Flying Dutchman" he did my 65 gt350 and did a great job.
http://water-pump-rebuilders.com
he is also in OR
Quote from: Greg on June 29, 2020, 02:12:51 PM
Wade Jenezson at the "Flying Dutchman" he did my 65 gt350 and did a great job.
http://water-pump-rebuilders.com
he is also in OR
Thanks, I will check it out.
Quote from: greekz on June 29, 2020, 03:12:25 PM
Quote from: Greg on June 29, 2020, 02:12:51 PM
Wade Jenezson at the "Flying Dutchman" he did my 65 gt350 and did a great job.
http://water-pump-rebuilders.com
he is also in OR
Thanks, I will check it out.
If you use him, please report back.
I sold 2 different FoMoCo aluminum 289 water pumps on eBay. He purchased one of them, and a random guy bought and drop shipped to Flying Dutchman.
Quote from: Krelboyne on June 29, 2020, 06:14:43 PM
Quote from: greekz on June 29, 2020, 03:12:25 PM
Quote from: Greg on June 29, 2020, 02:12:51 PM
Wade Jenezson at the "Flying Dutchman" he did my 65 gt350 and did a great job.
http://water-pump-rebuilders.com
he is also in OR
Thanks, I will check it out.
If you use him, please report back.
I sold 2 different FoMoCo aluminum 289 water pumps on eBay. He purchased one of them, and a random guy bought and drop shipped to Flying Dutchman.
Will do.
I've used Automotive Friction in Damascus, OR with great results...
http://www.autofriction.com/ (http://www.autofriction.com/)
Quote from: s2ms on June 29, 2020, 09:07:49 PM
I've used Automotive Friction in Damascus, OR with great results...
http://www.autofriction.com/ (http://www.autofriction.com/)
I will check them out as well.
Thanks!
Quote from: s2ms on June 29, 2020, 09:07:49 PM
I've used Automotive Friction in Damascus, OR with great results...
http://www.autofriction.com/ (http://www.autofriction.com/)
I have used them as well with both small block and FE water pumps with favorable results each time.
Best of luck
Cory
Jim Cowles in Green Bay just did one for me. Looks nice.
Got my pump back from Hart Bros. Core Co. (Oregon) and they did a very nice job. I had previously done the tubes myself (next time let them do it), but they went through the pump and did brgs/seals, put in the Hi-Po impeller, new back cover and gaskets. I asked them not to paint it, so they put on a primer.
I did buy the Hi-Po impeller from them, so that saved at least one direction of postage.
I would recommend them.
(http://www.concoursmustang.com/forum/index.php?action=dlattach;topic=4860.0;attach=67732;image)
You can also purchase a kit from Dead Nuts On and rebuild it yourself. I purchased a kit last year but haven't got a around to rebuilding mine.
https://www.deadnutson.com/water-pump-parts-kits/
Received my rebuilt water pump today from The Flying Dutchman. He did a thorough rebuild and primed the exterior. I also had him install the correct impeller. I am happy with the rebuild, and Wade was great to work with. Great communication!