SAAC Forum

SAAC Forum => SAAC Forum Discussion Area => Topic started by: Bigblock on October 08, 2020, 10:03:54 AM

Title: Are you a Shelby gearhead?
Post by: Bigblock on October 08, 2020, 10:03:54 AM
I failed the test. :(

https://www.hemmings.com/stories/2020/10/08/15-shelby-facts-you-should-know?refer=news&utm_source=edaily&utm_medium=email&utm_campaign=2020-10-08
 
Title: Re: Are you a Shelby gearhead?
Post by: JD on October 08, 2020, 10:59:49 AM
They this statement wrong:

So many people associate sequential turn signal taillights with classic Mustangs that Ford began adding them to the car in 2010 and will use them on the new Mustang Mach-e electric crossover. But the truth is Ford didn’t build Mustangs in the 1960s with the feature. They debuted on the Thunderbird in 1965 and on the Mercury Cougar in 1967. It was Shelby that put them on Mustangs from 1967-1970, using T-bird and Cougar taillights. The California Specials of 1968, which also used Shelby’s body parts and ’65 T-bird taillights, did not have the sequential turn signals.

As most here know, the '67 Shelby's did use Cougar tail light components but not the Sequential feature.  That feature was on the '68 - '70 Shelby's with the T-bird units.
Title: Re: Are you a Shelby gearhead?
Post by: Coralsnake on October 08, 2020, 11:17:38 AM
...and the sequencers were unique to 1968 Shelbys, not shared with other models
Title: Re: Are you a Shelby gearhead?
Post by: gt350hr on October 08, 2020, 11:37:38 AM
  The Hertz info is not quite right  re stripes and colors.
Title: Re: Are you a Shelby gearhead?
Post by: 68gtcoupe on October 08, 2020, 12:01:45 PM
It amazes me that, with everything that is now known about these cars, that some still can't manage to get it right.   ::)
Title: Re: Are you a Shelby gearhead?
Post by: Cobrask8 on October 08, 2020, 12:54:28 PM
Also, the 68 Sequentials were NOT Cougar or T-Bird based, rather an aftermarket piece purchased from J.C. Whitney. Able to install just in the trunk, but also made the brake lights sequence, which was illegal in California, New York, and Florida. Cars sold new in those states had the units removed.

The 65-68 T-Bird/Cougar Sequentials were such an interwoven wiring system, it could not be integrated. The 69-70 Shelby's used the Modern solid state trunk sequential unit by adapting the 69-70 Cougar rear wiring harness into the Mustang.
Title: Re: Are you a Shelby gearhead?
Post by: 2112 on October 08, 2020, 01:07:25 PM
Also, the 68 Sequentials were NOT Cougar or T-Bird based, rather an aftermarket piece purchased from J.C. Whitney. Able to install just in the trunk, but also made the brake lights sequence, which was illegal in California, New York, and Florida. Cars sold new in those states had the units removed.

The 65-68 T-Bird/Cougar Sequentials were such an interwoven wiring system, it could not be integrated. The 69-70 used the Modern solid state trunk flasher by adapting the 69-70 Cougar rear wiring harness into the Mustang.

Learned something new today.
Title: Re: Are you a Shelby gearhead?
Post by: 98SVT - was 06GT on October 08, 2020, 08:55:54 PM
a single Daytona Super Coupe (which never competed). - - It was not completed either. It sat unfinished for decades.

Shelby put Ken Miles in charge of creating a special lightweight Cobra powered by an experimental 500-hp all-aluminum 390 cubic inch big-block. - - This was a proof of concept idea for the 427 Cobra. Nassau was a race where people brought cars that offered creative rule interpretation. It became known as the Flip Top (and the Pelican while Royal Kreger owned it)

Shelby officially ended the production of Dragonsnakes when he stopped building 289 Cobras. - - Shelby did not produce the Dragon Snakes. They and the GT350 drag cars were farmed out to Les Ritchey and his Performance Associates in Covina CA for conversion. He was killed in his A/FX Mustang at Fontana in 1966 which may account for the lack of 427 drag cars.

Pete Brock-designed five-spoke alloy wheels made by Cragar. - - - Hadn't heard this one. Cragar offered the wheels with a plain steel rim and chrome trim ring. I thought they were already a Cragar product when CS selected them. Maybe Brock added the chrome rim.

Shelby’s involvement with the Mustangs that wore his name began to decline in 1968 when A.O. Smith in Michigan began assembling the cars at the request of Ford. - - - Shelby American's production of GT-350 & 500s ended mid way through 1967 when Ford assumed ownership of all the assets and trademarks. CS became a race team contractor at that time.
Title: Re: Are you a Shelby gearhead?
Post by: Tom Honegger on October 09, 2020, 11:38:57 AM
Also, I believe the "Turd" was not the flip top Cobra. Wasn't the "Turd" the Cobra
that Miles and John Morton drove at Sebring that hit a tree? Or did the flip top evolve
out of the Sebring car?
Title: Re: Are you a Shelby gearhead?
Post by: 8T03S1425 on October 09, 2020, 07:08:50 PM
Is the '70 Shelby front spoiler a Boss 302 front spoiler?
Title: Re: Are you a Shelby gearhead?
Post by: deathsled on October 09, 2020, 09:17:55 PM
a single Daytona Super Coupe (which never competed). - - It was not completed either. It sat unfinished for decades.

Shelby put Ken Miles in charge of creating a special lightweight Cobra powered by an experimental 500-hp all-aluminum 390 cubic inch big-block. - - This was a proof of concept idea for the 427 Cobra. Nassau was a race where people brought cars that offered creative rule interpretation. It became known as the Flip Top (and the Pelican while Royal Kreger owned it)

Shelby officially ended the production of Dragonsnakes when he stopped building 289 Cobras. - - Shelby did not produce the Dragon Snakes. They and the GT350 drag cars were farmed out to Les Ritchey and his Performance Associates in Covina CA for conversion. He was killed in his A/FX Mustang at Fontana in 1966 which may account for the lack of 427 drag cars.

Pete Brock-designed five-spoke alloy wheels made by Cragar. - - - Hadn't heard this one. Cragar offered the wheels with a plain steel rim and chrome trim ring. I thought they were already a Cragar product when CS selected them. Maybe Brock added the chrome rim.

Shelby’s involvement with the Mustangs that wore his name began to decline in 1968 when A.O. Smith in Michigan began assembling the cars at the request of Ford. - - - Shelby American's production of GT-350 & 500s ended mid way through 1967 when Ford assumed ownership of all the assets and trademarks. CS became a race team contractor at that time.
Les Ritchey's SOHC screamer.  WOW!!!
Title: Re: Are you a Shelby gearhead?
Post by: 69mach351w on October 10, 2020, 08:21:13 AM
It amazes me that, with everything that is now known about these cars, that some still can't manage to get it right.   ::)
+1  And when you read their articles, they type so fast to get their word out that they never proofread and I see wrong pronunciations and misspelled words constantly  ::)