SAAC Forum

The Cars => 1969-1970 Boss 302/429 => Topic started by: 69mach351w on December 04, 2020, 07:29:57 PM

Title: C8ZE-S1 Radiator Question
Post by: 69mach351w on December 04, 2020, 07:29:57 PM
Was curious about this question.... Was the C8ZE-S1 radiator shared with the Boss 429?  I know they were used in assemblyline for 428CJ/SCJ.

Thanks
Title: Re: C8ZE-S1 Radiator Question
Post by: Rickmustang on December 04, 2020, 07:54:10 PM
Yes
Title: Re: C8ZE-S1 Radiator Question
Post by: Royce Peterson on December 04, 2020, 08:00:33 PM
Also used on X code 390-2V and S code 390-4V Mustang / Cougar 1968 - 69.

Was curious about this question.... Was the C8ZE-S1 radiator shared with the Boss 429?  I know they were used in assemblyline for 428CJ/SCJ.

Thanks
Title: Re: C8ZE-S1 Radiator Question
Post by: Special Ed on December 04, 2020, 10:44:35 PM
c8ze  s  is auto   boss 9 used c8ze-l  like all big block 4 speeds
Title: Re: C8ZE-S1 Radiator Question
Post by: Rickmustang on December 04, 2020, 11:10:54 PM
See if it has the cooling line fittings at the bottom. Best way to tell if 4 speed on those
Title: Re: C8ZE-S1 Radiator Question
Post by: Special Ed on December 05, 2020, 09:15:42 AM
The bottom tank on c8ze-s is unique on big block auto rads vs 351  a/c  auto even thou they are the same width and lenght lower tanks. The difference is the distance apart of the 2 auto trans cooling line fittings. The c8ze-s big block auto fittings are wider apart than 351  a/c auto fittings  and  (if u ever take the rad apart to clean and recore)  u will see that the auto trans cooler round tube in bottom tank is bigger diameter and longer on the bigblock c8ze-s  vs  351  a/c  cooler tube .   The auto trans hard lines are bent differently where they attach to rad lower tank fittings  between the big block and 351  a/c .  I recently had to fix a customers C6 auto 428 scj mustang car that the rad wasnt fitting correctly and  the hard lines were in a bind. When i took rad out i seen where it was pieced together from other rad side straps and top and bottom tanks and it was assembled with a 351  a/c bottom tank and that why the C6 hard lines didnt fit correctly. I restored the rad with correct C6 big block bottom tank and everything fell into place and fit perfectly when rad was reinstalled.  The problem is nobody makes the correct big block lower tank with the C6 wider trans oil cooler so u have to find a used original and they are getting hard to find. All aftermarket auto rads  only come with smaller shorter  351 a/c lower tank cooler  so   u have to find an original c8ze-s  rad if u have a bigblock and u want  to restore it correctly.