SAAC Forum

Deals and Appeals => Up For Auction => Topic started by: silverton_ford on June 19, 2021, 12:22:32 AM

Title: 5R101 - Pebble Beach 2021 - Gooding & Company
Post by: silverton_ford on June 19, 2021, 12:22:32 AM
5R101 is coming to Gooding & Company Pebble Beach auction this summer.

(http://www.saacforum.com/gallery/44-190621001952.jpeg)

(http://www.saacforum.com/gallery/44-190621002036.jpeg)

(http://www.saacforum.com/gallery/44-190621002152.jpeg)

Link to auction
https://www.goodingco.com/lot/1965-shelby-gt350-r-1/ (https://www.goodingco.com/lot/1965-shelby-gt350-r-1/)
Title: Re: 5R101 - Pebble Beach 2021 - Gooding & Company
Post by: 98SVT - was 06GT on June 19, 2021, 12:40:06 PM
"The Voice of Willow" Alan Bolte's car. Somewhere I have some shots of its crash at Laguna when an axle broke..... and a fond memory of it at Willow when the nitrous bottle went off due to being overheated while parked in the hot sun.

(https://i.imgur.com/UJDm3Ajl.jpg)
Title: Re: 5R101 - Pebble Beach 2021 - Gooding & Company
Post by: sfm5s081 on June 22, 2021, 11:44:52 PM
Definitely a race car! Raced, crashed, banged up, repaired, raced repeat! This car has been rubber side up many times. Glad to see it's still out there.
Title: Re: 5R101 - Pebble Beach 2021 - Gooding & Company
Post by: Bob Gaines on June 23, 2021, 12:56:26 AM
Quote from: silverton_ford on June 19, 2021, 12:22:32 AM
5R101 is coming to Gooding & Company Pebble Beach auction this summer.



(http://www.saacforum.com/gallery/44-190621002036.jpeg)



Link to auction
https://www.goodingco.com/lot/1965-shelby-gt350-r-1/ (https://www.goodingco.com/lot/1965-shelby-gt350-r-1/)
Notice how the radiator filler neck has been relocated. I suspect it is a modern fix. That is because the galaxie radiators used in the R model were taller then a Mustang and notorious for hitting the GT350 hood. Most R models teams just smashed down the neck a little to solve or live with the issue. 
Title: Re: 5R101 - Pebble Beach 2021 - Gooding & Company
Post by: gt350bp on June 23, 2021, 07:52:19 AM
Yup. That's what I ended up doing with my radiator after lowering it into the opening with about 1/8" clearance at the lower radiator support. Two 1/8" neoprene pads to isolate lower tank.

Don
gt350bp