SAAC Forum

The Cars => 1967 Shelby GT350/500 => Topic started by: Lfino on January 08, 2022, 04:23:24 PM

Title: 1967 gt500 pvc hose
Post by: Lfino on January 08, 2022, 04:23:24 PM
April car. Not concours correct, but not a Frankenstein either. 427 rather than 428. Shouldn't matter for this question.
Looking for a correct pvc hose from passenger side valve cover breather to bottom of air cleaner assembly.
Do not want to tap into intake.
Seems each nipple is slightly different diameter.
Suggestions please.
Title: Re: 1967 gt500 pvc hose
Post by: Bob Gaines on January 08, 2022, 06:31:23 PM
April car. Not concours correct, but not a Frankenstein either. 427 rather than 428. Shouldn't matter for this question.
Looking for a correct pvc hose from passenger side valve cover breather to bottom of air cleaner assembly.
Do not want to tap into intake.
Seems each nipple is slightly different diameter.
Suggestions please.
I have a NOS assemblyline correct 67 GT500 PCV hose which may or may not be over kill for what you are doing 185.00 shipped to your door. PM me if the assemblyline hose is what you want. 
Title: Re: 1967 gt500 pvc hose
Post by: Lfino on January 08, 2022, 06:52:47 PM
Exactly!
Thanks, pm coming.
Title: Re: 1967 gt500 pvc hose
Post by: Carl111 on August 09, 2022, 08:41:15 PM
Bob, I'm just curious. With the original setup was there an actual PCV Valve or was this just a crankcase vent? If so was it the "usual" valve or something else?
Care to post a picture?
Thank you.
Title: Re: 1967 gt500 pvc hose
Post by: Bob Gaines on August 09, 2022, 09:47:15 PM
Bob, I'm just curious. With the original setup was there an actual PCV Valve or was this just a crankcase vent? If so was it the "usual" valve or something else?
Care to post a picture?
Thank you.
Same PCV valve EV 42 as a 390 although it was not very effective in the assemblyline configuration.