Text only | Text with Images

SAAC Forum

SAAC Forum => SAAC Forum Discussion Area => Topic started by: tooeys on September 14, 2018, 04:05:43 PM

Title: 65 Shelby GT 350
Post by: tooeys on September 14, 2018, 04:05:43 PM
I have a Frend that wants to build a 65 GT 350 replica but with a Coyote engine. I know he will need to stiffen the 65 to keep it from twisting. Is there a kit that would be like what Shelby used?
that
Thanks
Jack
Title: Re: 65 Shelby GT 350
Post by: papa scoops on September 14, 2018, 04:06:49 PM
no.
Title: Re: 65 Shelby GT 350
Post by: pmustang on September 14, 2018, 04:26:14 PM
Most repro items can be purchased from Tony Branda

Good luck with the project

Cheers. Peter
Title: Re: 65 Shelby GT 350
Post by: mygt350 on September 14, 2018, 06:58:56 PM
Zray, a forum member, offers a really nice lower cross member support that also has a integrated jack pad that clears the Cobra pan. I think the single piece export brace and Monte Carlo bar are available from Brant (forum member) Virginia Classic Mustangs as well as other aftermatket suppliers. The challenge in installing a Coyote engine are clearing the existing spring towers.
Title: Re: 65 Shelby GT 350
Post by: Don Johnston on September 15, 2018, 01:28:58 AM
I recall that Mustang Monthly has done an article or two on Coyote resto-mod installs in early Mustangs.  You might check their index.  Mustangs Plus might have parts as well. 
Text only | Text with Images