I have two spacers that were with my A/C compressor and P/S pump mount bolts and I have no idea where they go, any thoughts? Pictures attached (I hope)
Quote from: SChatman on January 13, 2019, 04:15:20 PM
I have two spacers that were with my A/C compressor and P/S pump mount bolts and I have no idea where they go, any thoughts? Pictures attached (I hope)
Typically used on non A/C or in some instances non P/S applications on water pump bolts to compensate for the AC and or P/S brackets . They don't have to be used when various accessories are used because the bracket takes up the same space.
Quote from: J_Speegle on January 14, 2019, 06:17:50 PM
To help illustrate what Bob was referring to
The thin spacers are the ones the OP is talking about are like the ones in my picture . AMK shows where they go in their bolt kits. I only had a 68 version handy.
Quote from: Bob Gaines on January 14, 2019, 06:25:14 PM
The thin spacers are the ones the OP is talking about are like the ones in my picture . AMK shows where they go in their bolt kits. I only had a 68 version handy.
Sorry thought you were referring to the thicker ones. The thinner ones were not used on small blocks with PS but without AC that year
Quote from: Bob Gaines on January 14, 2019, 05:37:58 PM
Typically used on non A/C or in some instances non P/S applications on water pump bolts to compensate for the AC and or P/S brackets . They don't have to be used when various accessories are used because the bracket takes up the same space.
Removed my pictures since they are not related to the question ;)
Thanks guys