SAAC Forum

The Cars => 1967 Shelby GT350/500 => Topic started by: acman63 on June 14, 2019, 06:02:18 PM

Title: tire selection for steel wheels
Post by: acman63 on June 14, 2019, 06:02:18 PM
who has run modern radials  with the 15 x 6  steel wheels.   brand ? , size ?,    no clearance issues tire?
Title: Re: tire selection for steel wheels
Post by: zray on June 14, 2019, 10:27:12 PM
who has run modern radials  with the 15 x 6  steel wheels.   brand ? , size ?,    no clearance issues tire?

I put a set of Avon CR6ZZ tires (215/60-15) on a set of Ford 15x6 wheels with 3 7/8" BS'ing. The car was a '65 K code. I can think of no other suspension improvement for the money that will transform a car so dramatically for the better. Absolutely no rubbing issues,

http://www.avonmotorsport.com/historic/historic/cr6zz

 I'm pretty certain a set of 65 profile tires would've fit just fine too. Certainly they would on the '67's.

Z.

PS  single wheel pictured was not the one I used, but has the same backspacing, etc.  mine were likely from a '70's econoline van.

(https://i.imgur.com/n85JbMf.jpg)

(https://i.imgur.com/4PpDNqZ.jpg)

(https://i.imgur.com/0y7eWh1.jpg)

(https://i.imgur.com/R98rN5W.jpg)

Title: Re: tire selection for steel wheels
Post by: Bossbill on June 14, 2019, 11:42:03 PM
Since those wheels have no nubs for hubcaps it's doubtful if they are from an Econoline. Most vans had dog dish or poverty hubcaps.
From what I've seen while looking for wheels, those are likely from a Crown Vic.

I like the look of the no nub wheels.
Title: Re: tire selection for steel wheels
Post by: shlby66 on June 15, 2019, 02:23:09 PM
who has run modern radials  with the 15 x 6  steel wheels.   brand ? , size ?,    no clearance issues tire?

      +1 on the AVON CR6ZZ's. Great vintage look and loads of performance. No disappointment there.

      I used,  AVON 215/70-15's  on Shelby Cragars and they look killer. No rubbing issues.

      Doug 
Title: Re: tire selection for steel wheels
Post by: zray on June 15, 2019, 04:55:17 PM
Since those wheels have no nubs for hubcaps it's doubtful if they are from an Econoline. Most vans had dog dish or poverty hubcaps.
From what I've seen while looking for wheels, those are likely from a Crown Vic.

I like the look of the no nub wheels.

Thanks for the clarification, IIRC, my wheels had a 1970's date code.  No longer have the car so I can't be certain.



  +1 on the AVON CR6ZZ's. Great vintage look and loads of performance. No disappointment there.

      I used,  AVON 215/70-15's  on Shelby Cragars and they look killer. No rubbing issues.

      Doug

I've heard from a few people that the 215's were too wide for a 6 inch wheel.  However, my experience seems to fly in the face of that assertion.  The contact patch, traction, and tire wear were all excellent, and identical to the 215 Avons I've had on 7 inch wheels.

Z