anyone have a good source for a stock 3 finger pressure plate? 10 1/2 inch. seems like everyone is going to the diaphragm McLeod is trying to make more but im not holding my breath
I was told last year that LuK has one?
Hope that you find what you need.
if you have a number for LUK Im all ears. all im seeing is diaphragm
RAM Clutches has them. Contact is Mike Norica.
I was going by what someone "told me" in an email... but had decided to go diaphragm and stopped looking.
I had seen the RAM brand as well, but was not familiar with them.
Sorry for any confusion :-[
The Ram 88502 is 10.5" with a 1900 lb clamping force, as told to me by a RAM specialist
https://www.summitracing.com/parts/ram-88502
Yes, the RAM #88502 @ approx. 1900 lbs., or the RAM #92502 @ approx. 2600 lbs.; and the HD or HDX suffix for different friction disc materials depending on requirements.
We have been a dealer for RAM for several decades, and I believe one would find their product to be excellent.
But do try to buy products for someone other than the big mail order houses, perhaps your local brick-and-mortar establishment who may at times be able to provide some competent guidance every once and a while, and be rewarded for their effort.
Scott.