SAAC Forum

Deals and Appeals => Cars For Sale => Topic started by: Coralsnake on August 19, 2019, 10:40:04 AM

Title: 1967 Econoline van
Post by: Coralsnake on August 19, 2019, 10:40:04 AM
(http://www.thecoralsnake.com/coralvan1.jpg)

Located in Middleton, Wisconsin. Extremely solid, Texas van. Has motor, but does not run. Perfect to build your Shelby race assistance van . Currently has no title. Extended body and dual “pass through” doors on both sides of van.

I have a gallon of Viking blue and Wimbeldon white paint to throw in the deal. Let me put in touch with the current owner

$3000

This could be you:

(http://www.thecoralsnake.com/windowvan4.jpg)

Coralsnake68@hotmail.com
Title: Re: 1967 Econoline van
Post by: BajaBroncos on August 27, 2019, 11:50:14 PM
Any idea if they have the glass and trim?
Title: Re: 1967 Econoline van
Post by: Coralsnake on August 28, 2019, 07:17:44 AM
I believe all the glass is there except the windshield. The econoline does not have the trim, that the Falcon (shown above) does

These vans have quite a following. Obtaining parts should not be overly difficult and its a lot cheaper than Shelby parts.
Title: Re: 1967 Econoline van
Post by: Coralsnake on August 28, 2019, 05:35:38 PM
Who the heck would get a Marti report for a van :-) ?

(http://www.saacforum.com/gallery/8-280819173429.jpeg)
Title: Re: 1967 Econoline van
Post by: Coralsnake on August 28, 2019, 05:36:20 PM
Glass

(http://www.saacforum.com/gallery/8-280819173357.jpeg)
Title: Re: 1967 Econoline van
Post by: Coralsnake on August 28, 2019, 05:37:24 PM
Seats, I have heard these were also used in Thunderbolts?

(http://www.saacforum.com/gallery/8-280819173022.jpeg)

Title: Re: 1967 Econoline van
Post by: Coralsnake on August 28, 2019, 05:38:22 PM
Mustang gas tank (I think) and a seat bolster of OEM Material

(http://www.saacforum.com/gallery/8-280819172901.jpeg)
Title: Re: 1967 Econoline van
Post by: Coralsnake on August 28, 2019, 05:39:17 PM
Hubcaps and misc stuff

(http://www.saacforum.com/gallery/8-280819172807.jpeg)
Title: Re: 1967 Econoline van
Post by: Coralsnake on August 28, 2019, 05:41:36 PM
This is almost free, you cant afford not to have this project....the wheels, hubcaps, the van, the parts, oem upholstery, the paint. It's a bargain!

Has original door tag and VINs intact. This is not just a van it's a "Super" Van (extended version)

No title included, so you will need to fight that battle. If you have not seen the "pass through" doors it's a trip. The entire middle section of the van opens up.

 :D
Title: Re: 1967 Econoline van
Post by: Side-Oilers on August 28, 2019, 10:20:04 PM
But the Marti report doesn't say it's 1 of 1.  I thought just about every Marti report parsed it down to 1 of ...
Title: Re: 1967 Econoline van
Post by: Harris Speedster on August 29, 2019, 09:09:47 AM
If memory serves me correctly, this van, or an earlier year one, would have backing plates that were used on a 65 Shelby?
Heavy duty service vans like electric companies and other service companies used?

Some were 5 bolt, not sure about 4 bolt pattern?
I think the seat frames were used in some light weights, ?
Going back many moons,
John
Title: Re: 1967 Econoline van
Post by: Coralsnake on August 29, 2019, 09:09:26 PM
Sale pending
Title: Re: 1967 Econoline van
Post by: BajaBroncos on August 30, 2019, 12:54:39 PM
Ah, my gentle prodding worked...

McQueen owned one!  Just sayin...  that’s the replica I’d build.