Text only | Text with Images

SAAC Forum

The Cars => 1967 Shelby GT350/500 => Topic started by: nightmist67 on October 10, 2019, 09:57:15 AM

Title: GT500 Engine Detail Question
Post by: nightmist67 on October 10, 2019, 09:57:15 AM
For a 1967 GT500 with thermactor emissions system, what components connect the port on the oil breather tube to the elbow fitting on the bottom of the air cleaner base?  Are there any photos that show those details?
Title: Re: GT500 Engine Detail Question
Post by: 2112 on October 10, 2019, 10:09:56 AM
Not my engine but this might help
Title: Re: GT500 Engine Detail Question
Post by: nightmist67 on October 10, 2019, 03:23:24 PM
The photo confirms the hose and check valve/flame arrestor in way of the oil breather and air cleaner.  Can anyone provide a photo of and/or part number for the check valve/flame arrestor for this application?
Title: Re: GT500 Engine Detail Question
Post by: Bob Gaines on October 10, 2019, 04:23:02 PM
Quote from: nightmist67 on October 10, 2019, 03:23:24 PM
The photo confirms the hose and check valve/flame arrestor in way of the oil breather and air cleaner.  Can anyone provide a photo of and/or part number for the check valve/flame arrestor for this application?
Short nipple tube version is assemblyline correct . Long nipple tube version is the next best thing after shortening the nipple tubes on ether side.
Text only | Text with Images