Need help with the correct bolt type for the power steering bracket attaching to the water pump on a 1969 428 CJ.
Thanks
Dave
TTT
Yo Hommie like the size and thread or color n patina deal?
Quote from: Bigfoot on November 09, 2019, 01:52:48 PM
TTT
Yo Hommie like the size and thread or color n patina deal?
Like bolt type. I have two bolts 9/16 head with built in washer, one is slightly longer than other. Just wondering if those were right ones Home Slice.
Quote from: Sixx7shelby on November 08, 2019, 08:10:33 PM
Need help with the correct bolt type for the power steering bracket attaching to the water pump on a 1969 428 CJ.
Thanks
Dave
Flange head bolt .
There are different different used depending on the exact placement. If it is only holding one bracket directly to the water pump it is the shorter one. If it's holding multiple brackets like in an air-conditioned car it would be the longer one
Several different head markings, common is RBW and also use a lot was one with a F in the center and a third one has no marking in center of bolt however all three are the same type flanged head
There are also differences in the diameter of the flange washer. Ones used to hold an adjustment in slot have a wider built-in washer
Quote from: Sixx7shelby on November 09, 2019, 05:49:08 PM
Quote from: Bigfoot on November 09, 2019, 01:52:48 PM
TTT
Yo Hommie like the size and thread or color n patina deal?
Like bolt type. I have two bolts 9/16 head with built in washer, one is slightly longer than other. Just wondering if those were right ones Home Slice.
That's O G gangsta fo sho.
^^
Fo Realz !
Thanks guys, that all I needed to know. I appreciate it!
Dave