Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - nwfire

Pages: [1] 2
1
1967 Shelby GT350/500 / sound deadening material / door panels
« on: April 12, 2022, 12:26:38 PM »
So, #906 is going in for new paint next month.  While this won't be a concourse restoration, I would like to make it as factory correct as I can.  I'm looking for replacement insulation/sound deadening material for around the rear fender wells, and the upper and lower air scoop area.  Currently I can't find any material to match some of the original material still on the car.  Anyone have suggestions as to where to find this material?  Also, I'd like to replace my Deluxe door panels with the brushed aluminum inserts as the ones on the car now are hard as rocks and don't lay flat on the doors.  Anyone have suggestions here also as to who has a quality door panel that fits well?
Thanks for your help.

2
1967 Shelby GT350/500 / Re: One piece fuel line, GT500
« on: February 13, 2022, 04:40:55 PM »
Yes, drive line, rear suspension, exhaust system is all in place.

3
1967 Shelby GT350/500 / Re: One piece fuel line, GT500
« on: February 12, 2022, 10:38:53 PM »
Yes I do.

4
1967 Shelby GT350/500 / One piece fuel line, GT500
« on: February 12, 2022, 07:37:31 PM »
Can anyone recommend a one piece fuel line for the 67 GT500 that actually fits without making a bunch of changes to it?  Purchased one from NPD and although it says it's for the GT500, it's quite different than the one I have on it now.  Also, any easy way to thread one of these in place??

Thanks.

5
GT/CS - California Special / Power Steering Fluid
« on: July 25, 2021, 11:47:04 PM »
Can someone tell me what the power steering fluid should be for the 1968 California Special Mustang with 302 engine??
Thanks.

6
1967 Shelby GT350/500 / Re: What did you do to your '67 today?
« on: July 11, 2021, 11:33:47 PM »
We took #906 (1967 GT500) out Saturday the 10th with a few friends with various make cars on a drive from Mount Vernon, WA. to Winthrop, WA., across the North Cross Highway for a beautiful drive.  About 275 miles roundtrip.  One of the most beautiful drives you'll encounter.  Mountain passes about 5700 feet in elevation, light traffic, 3 large dams on the Skagit River that produce power for the City of Seattle and plenty of pull-outs to take in the views.  Oh, cold beer at each end of the drive also!

7
1967 Shelby GT350/500 / Re: Post a Photo of your '67 Shelby
« on: June 17, 2021, 11:16:00 PM »
@nwfire Love your car, love parchment gut. Show us more.

Don't have any interior pictures.  Just placed correct heads, exhaust manifolds and complete new exhaust system on this past winter.  Correct intake and 2 x 4 carbs but not BJ, BK's.

8
1967 Shelby GT350/500 / Re: Post a Photo of your '67 Shelby
« on: June 17, 2021, 11:08:03 PM »
@nwfire which part of Washington are you in?

Nice GT500!


I'm in Mount Vernon, north of Seattle.

9
1967 Shelby GT350/500 / Re: Post a Photo of your '67 Shelby
« on: June 16, 2021, 10:49:10 PM »
Here's #906.  In the family since 1977.  My brother bought it and passed it along to my son and I when he passed away in 1996.  I've been told one of 9 with white paint and parchment interior.  She's going in for new paint this fall.

10
1967 Shelby GT350/500 / kick down cable adjustment
« on: January 13, 2021, 10:49:47 PM »
Can anyone help with explaining the proper procedure for adjusting the kick down cable on a 1967 GT500 with a C6 automatic transmission??

Thanks.

Terry Hill
1967 GT500, #906


11
1967 Shelby GT350/500 / Re: 67 PlazaGlas stickers
« on: August 09, 2020, 10:42:49 PM »
I'd be in for three (3) also when available.

12
1967 Shelby GT350/500 / Re: GT500 carb heater tube
« on: March 23, 2020, 11:01:55 PM »
Any idea where you can find the small filter for the top of the lower tube ???

13
1967 Shelby GT350/500 / Re: GT500 carb heater tube
« on: March 18, 2020, 11:07:54 PM »
Thanks Bob & Jeff.  So is the tube that goes from the exhaust to the carb just a press in fit at the exhaust end??  My tube won't fit the hole in the top of the exhaust manifold but there appears to be a metal insert or tube that's been cut off in the hole itself.
Terry

14
1967 Shelby GT350/500 / GT500 carb heater tube
« on: March 18, 2020, 01:32:15 PM »
Putting the dual quads back on my GT500.  Where does the carb heater tube go on the passengers side of the engine and is this a two piece heater tube connected together by a flex/vaccum type hose?  Anyone have pictures where it is affixed on the engine/exhaust on the passenger side??
Thanks.

15
1967 Shelby GT350/500 / Re: intake manifold oil filler cap
« on: March 13, 2020, 10:56:03 PM »
OK, thanks.  I've got one on order from Cobra Automotive.  Salesman sent a couple of pictures of one on a car there and it appears to be the correct one.

Pages: [1] 2