Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - cascade-classics

Pages: [1] 2 3 ... 5
1
Parts For Sale / Re: 67 Original trunk lid
« on: May 05, 2022, 11:59:00 AM »
This trunk lid is still available.

2
Parts For Sale / Re: 67 Original trunk lid
« on: August 21, 2021, 08:45:58 AM »
Hi, Do you have the end caps to go with it? Cheers

I do not.

3
Parts For Sale / Re: 67 Original trunk lid
« on: August 19, 2021, 12:30:59 PM »
Some more photos.

4
Parts For Sale / 67 Original trunk lid
« on: August 19, 2021, 10:32:52 AM »
Original Shelby trunk lid off a 67 GT350.  Needs some attention. Can ship UPS but it will be expensive due to the size.  $250 plus shipping. PM please.

5
1967 Shelby GT350/500 / Re: Choke cable mounting position
« on: December 19, 2020, 09:45:42 AM »
Found this over on concours Mustang.  Looks like it is right against the kick panel. 

http://www.concoursmustang.com/forum/index.php?topic=16472.0

Thanks for your help.

6
1967 Shelby GT350/500 / Choke cable mounting position
« on: December 18, 2020, 09:27:40 AM »
Does anyone have a good picture of the exact position the choke cable is mounted under the dash on a 67 GT350?   Most pictures show it under the heater controls but are too far away to see what exact holes are used. 

Thanks.

7
1967 Shelby GT350/500 / Re: 1967 GT350 air cleaner decal
« on: December 16, 2020, 04:35:31 PM »
The article has useful and interesting information but also has some information that is not accurate. You should have the Cobra sticker in the front and a small sticker in the back on the 67 GT350. NPD sells a repro of the small sticker on pg 325  . Part number D-122. The Autoite sticker and or the HIPO sticker were not typically used. FYI the Cobra sticker was also used on the 428 MKIII Cobra single four barrel Hipo type aircleaner .

I think you meant to type D-112 for the C7 ('67) part,

 
https://www.npdlink.com/product/decal-part-number-air-cleaner-c7zf-9600-f-located-at/125599?backurl=search%2Fproducts%3Fsearch_terms%3DD-112%26top_parent%3D200001%26year%3D

not D-122 for the D1 ('71) boss 351 part?
https://www.npdlink.com/product/decal-air-cleaner-autolite-replacement-filters/125609?backurl=search%2Fproducts%3Fsearch_terms%3DD-122%26top_parent%3D200001%26year%3D

Thanks JD . I amended my typo.

In the above post(s) Bob adjusted to the D-112 part number.
Link:
https://www.npdlink.com/product/decal-air-cleaner-part-number-c7zf-9600-f/125599?backurl=search%2Fproducts%3Fsearch_terms%3DD-112%26top_parent%3D200001%26year%3D

Image of correct sticker is the top one in Reply #7 above, and it is shown on the lid with the COBRA sticker 180 degrees away in the second image in reply #1, as Bob G stated.

And yes, I think the sheet maybe incorrect

[quote cascade-classics]
I was going throug the SAAC Convention 43 judging rules for the 67 and on page 8 it states under Engine Compartment Decals "GT350 - Autolite Spark Plug Decal and Cobra Power by Ford decal on air cleaner"   Is this an error? I went with the D-122 (Part number) decal as you specified, not the Autolite Plug decal.
Quote

Thanks JD.  I made the same typo!  I used the D-112 not the D-122.  I corrected my original reply.

8
1967 Shelby GT350/500 / Re: 1967 GT350 air cleaner decal
« on: December 16, 2020, 12:51:24 PM »
Should the Autolite sticker be there, 180deg from the COBRA sticker?

Pictured in this article, that explicitly says you can share this link in forums.
https://www.diyford.com/shelby-mustang-history-1967-gt350-gt500-longer-shelby/
The article has useful and interesting information but also has some information that is not accurate. You should have the Cobra sticker in the front and a small sticker in the back on the 67 GT350. NPD sells a repro of the small sticker on pg 325  . Part number D-112. The Autoite sticker and or the HIPO sticker were not typically used. FYI the Cobra sticker was also used on the 428 MKIII Cobra single four barrel Hipo type aircleaner .

I was going throug the SAAC Convention 43 judging rules for the 67 and on page 8 it states under Engine Compartment Decals "GT350 - Autolite Spark Plug Decal and Cobra Power by Ford decal on air cleaner"   Is this an error? I went with the D-112 (Part number) decal as you specified, not the Autolite Plug decal. 

9
Parts For Sale / 67-68 Shelby Outer Bumper brackets
« on: December 08, 2020, 09:29:15 AM »
Pair of Tony Branda reproduction outer bumper brackets listed for 67-68 Shelby. Brand new but repainted gloss black.  Retail for $73.90. Selling for $65 plus shipping.

10
1967 Shelby GT350/500 / Re: Deluxe Door Panel Inserts
« on: November 23, 2020, 10:18:39 AM »
Burton Antique Auto Parts has the door panel and dash inserts made of real stainless with the backing.  Much better than the other reproductions.   EDIT - Not sure why I said stainless, I meant brushed aluminum. 

11
1967 Shelby GT350/500 / Re: Rear end housing marking
« on: November 18, 2020, 06:57:28 PM »
Not all housings had the same markings.You are better off with none at all then something that was wrong . For instance in concours you are not deducted for not having a assemblyline marking however if you put something there you had better be able to document that it was there on a 67 Shelby . Also if a obscure seldom seen type marking and given they typically did not all get markings you may get push back to provide reasonable documentation that it was used on your specific car (pre restoration photos etc.). Just because it was on one 67 Shelby car doesn't necessarily mean it should be on your car.  I would be most concerned about the proper historical components on the housing. For instance I see that you are missing the rear brake line strap and the rear axle tube ID paper tag. Those things were on all of 67 production.I think Dead nut on sells both.

I just checked with Jack at Dead Nuts On and he does not have the paper tags for 67 Mustang/Shelby. He did say if he has the numbers he could make them.

12
Services Offered / Re: correct phosphate finish for hood hinges
« on: November 10, 2020, 09:57:38 AM »
Jack at Dead Nuts On did ours.  Look great.

13
Wanted to Buy / 67 GT350 emblem
« on: October 10, 2020, 11:11:24 AM »
Need one NOS 67 GT350 grille/dash/trunk emblem.  Must have all 4 studs present. PM if you have one.

Thanks,

John

14
1967 Shelby GT350/500 / Re: Another 67 Tail Panel question
« on: June 11, 2020, 11:17:56 AM »
Was the fiberglass repro taillight panel on the car prior to restoration? What was on it before or did you get disassembled?

I am fairly certain it is an original panel.  Both it and the buckets were still attached to the car when it was purchased. Tail lights were missing.  Picture of the back of the car as found.  We had to fill the mounting holes as many were cracked.  I will re-drill them once everything is fit back together.
The before tail panel picture looks different then the restored tail panel picture at the trunk opening lip area . Has the panel been changed since the picture was taken or has the panel been modified?

Not exactly sure what you are comparing but here is a picture of the same part after paint.   As stated earlier mounting holes were repaired and will be drilled once everything lines up.

15
1967 Shelby GT350/500 / Re: Another 67 Tail Panel question
« on: June 10, 2020, 11:50:58 PM »
Was the fiberglass repro taillight panel on the car prior to restoration? What was on it before or did you get disassembled?

I am fairly certain it is an original panel.  Both it and the buckets were still attached to the car when it was purchased. Tail lights were missing.  Picture of the back of the car as found.  We had to fill the mounting holes as many were cracked.  I will re-drill them once everything is fit back together.

Pages: [1] 2 3 ... 5