Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 7777kx

Pages: [1] 2 3 ... 5
1
Wanted to Buy / Re: WTB-67 289 Hi-Po Radiator
« on: February 17, 2024, 01:22:14 AM »
Hello, thanks for your message. A late 66 or very early 67 dated unit would fit well with the GT's build. Can you help?
Thanks Alan

2
Wanted to Buy / WTB-67 289 Hi-Po Radiator
« on: February 15, 2024, 02:23:48 PM »
Can any forum member help please........ i need an original radiator [restored or needing work] for an early 67 build GT350 4-speed.
What have you?
Any help would be much appreciated, thanks Alan
please email faulknerstevens@btinternet.com

3
Wanted to Buy / Re: 67 GT350 Engine parts needed
« on: January 20, 2024, 02:58:44 AM »
Thank you very much for the links and advice on getting the parts i need, very much appreciated.

4
Wanted to Buy / 67 GT350 Engine parts needed
« on: January 19, 2024, 11:24:59 AM »
Would any forum user have the following parts needed, for a 67350 in my shop....
1. Correct Hi-Po engine dipstick.
2. Correct Hi-Po fuel pump.
NOS, restored original, WHY?
Good price paid.
Thanks Alan
please email: faulknerstevens@btinternet.com

5
Parts For Sale / 68 Shelby Rear Seat-Belt Set
« on: October 24, 2023, 12:02:14 PM »
I have a rear seat set of fully restored belts, originally from my 68GT500 #523 for sale.
Complete with fresh Labels.......Hamill W7DA 42-67
Work was undertaken by Ssnake Oyl, who did a superb job on them.
Price is $395 including postage to your USA address.
Please email Alan for pictures and any questions you need answering..................... faulknerstevens@btinternet.com
I am UK based but can supply US references.
Thanks.

6
Wanted to Buy / Re: 68 GT350 Seat Belts and heater plenum
« on: October 22, 2023, 01:05:30 AM »
Hello, i believe in my spares store i have a set of rear belts, that came fron 68GT500 #523.
If you are still looking for a set, please email me and i will take a good look for you.
Thanks Alan
email: faulknerstevens@btinternet.com

7
Misc. For Sale / Original 68 Shelby Sales Brochure for sale
« on: October 21, 2023, 08:38:36 AM »
I have an original, 68 Shelby Sales Brochure for sale. It is in excellent condition and is signed by Carroll Shelby.
I have owned this for 15 plus years....i knew John Ashboure who ran the Shelby Heart Trust here in the UK and if Carroll came over he would often stay at John's home.
John kindly arranged for Carroll to sign the brochure for me, but it is dedicated to me.
I am asking $400 including postage to any US purchaser.
For detailed pictures and any other information, please email me at:
faulknerstevens@btinternet.com
Many thanks Alan.

8
1968 Shelby GT350/500/500KR / Re: Holley Carb #4168
« on: December 14, 2022, 12:56:57 PM »
Hello Guys, many thanks for the information.
I am sorry, i gave you wrong information.......the choke pull of is via the heat rise tubes from the manifold, not electric. My sincere apologies about my error.
What i need is to convert the manual choke opertion to one which works from the heat riser tubes, anybody have one to sell or know the part number of a replacement?
Thanks again
Alan.

9
1968 Shelby GT350/500/500KR / Holley Carb #4168
« on: December 14, 2022, 06:09:17 AM »
Would any forum user know the Holley part number of the electric choke pull off system, when originally fitted to this carb.
I need one to replace the manual choke assembly currently installed.
Any help much appreciated, thanks Alan

10
Wanted to Buy / Re: KR Ported Vacuum Switch
« on: November 17, 2022, 01:09:45 AM »
Thank you for the advice and especially Jeff for the detailed pictures, very much appreciated.
Based upon that info, a switch around May 68?....WHY?
Thanks again, Alan.

11
Wanted to Buy / KR Ported Vacuum Switch
« on: November 15, 2022, 01:44:07 PM »
Would like to buy a Ported Vacuum Switch [C8AE-E] for 68KR #03388, as its missing.
Would any forum member have one they are willing to sell?
Thanks Alan

12
Cars For Sale / Re: 1966 GT350 Carry-Over for sale UK
« on: August 13, 2022, 03:29:23 PM »
Thank you so much for your detailed response.
You are quite correct in your definitions of a cars correctness, we try to follow the same ethos here in the UK.
Those of us involved with Shelby cars try our best to follow the lead of the US SAAC restorations as they will always have better access to detailed information. However we do speak to many of the best known judges who have, in my experience, been so kind and helpful to allow us to do a better job by imparting what they know.
I can confirm all the chassis stampings are original and correct to the car, along with the stamped numbers in the block.
Again the main date coded components do correspond to the cars build date but of course as you say, could have been changed in the past.
Once the old black paint was stripped from the shell, the car showed the most Factory correct body pieces i have come across on a Shelby, of course bearing in mind i only have 45 years direct experience, i would never claim to have the expertese of many of the US long time Shelby guys. I could have easily missed a very fine detail only they would know.
But every detail was photographed and any relevant number noted for future reference.
It is a great car in my humble opinion and was a great joy to help the owner restore it.

13
Cars For Sale / Re: 1966 GT350 Carry-Over for sale UK
« on: August 13, 2022, 02:04:23 PM »
Thanks for your post, as the car is #240...it can only be a Carry-Over, verfied by Bill Collins.

A known US history, again verified by some previous and known US owners.

14
Cars For Sale / Re: 1966 GT350 Carry-Over for sale UK
« on: August 13, 2022, 12:30:56 PM »
Thank you for putting the link of the forum, very much appreciated.

The car has its original extra Super-charger gauges mounted under the dash, hence the plastic pipe in the bay, feeding one of the gauges.

The transmission [aluminum T10] and differential are correctly dated, fully in-line with the build date of the car. 

15
Wanted to Buy / Re: 1968 Shelby Console items needed
« on: August 13, 2022, 12:22:52 PM »
Hello Guys,
    Thanks for your responses to my post.
I need black colored items, could you kindly send me pictures and the price of your parts to my email:
7777kx@gmail.com
Many thanks
Alan

Pages: [1] 2 3 ... 5