Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - kram350

Pages: [1] 2
1
SAAC Forum Discussion Area / Koni rebuild
« on: September 18, 2019, 10:41:30 PM »
Thought some may be interested in what's inside a Koni. Shown is a 4-65 dated SP-1 82-1326 front shock, a different shock than the later SP-3 82-1388 unit. The valving in both are basically the same, but the threaded gland nut top is a totally different setup making the internal seals and piston rod/cylinder sightly longer in the 1388.  Shocks dated 11-64 SP-1's have an even different internal configuration and valving from those dated 3-65.  Many production changes over months which seem to minimize machining requirements, number of needed parts and simplified assembly. This unit was toast with a rusted/seized rod, totally clogged valve orifices, drain-back channels and locked up in the firm position. Parts in these shocks are quality and robust.  With clean-up, new seals and rod this should be really to go.     

2
Parts For Sale / 1965/6 GT350 7/8" LUG WRENCH
« on: September 17, 2019, 12:35:32 PM »
Lug wrench for the 7/8" lugs. Reproduction. Never used. $100.00

3
Parts For Sale / 1965 GT350 original Delco tachometer
« on: September 13, 2019, 09:45:52 PM »
Original tach. No issues, works as it should. Bezel nice, some clouding on the glass, but barely noticeable. Light bulb holders there, never appears to have been apart. $5,500.00. 

4
Parts For Sale / T-10M transmission
« on: September 13, 2019, 09:40:33 PM »
Perfect condition, ready to install, just pulled from running car. Synchronizers and blockers look great, shifts as it should.  Linkage and shifter included, but no upper handle assembly. Main case casting 7-27-65, but no stamped assembly date. Aluminum tail housing. $11,500.00. Will ship in wooden crate.

5
Wanted to Buy / 1965 GT350 TACH
« on: August 09, 2019, 04:05:58 PM »
Looking for a 1965 GT350 reproduction tachometer. Thanks 

6
Secura/FIV over the counter steering wheel horn parts.  In need of the snap on brushed stainless steel horn button surround and the lower surround thats mounted to the back side of wheel frame, butts up to the steering column. Will consider in any condition. Thanks   

7
Wanted to Buy / T-10M aluminum tailhousing for GT350
« on: April 05, 2019, 10:19:08 PM »
Looking for either original or reproduction. Have nickel gears, clusters to trade.

8
1966 Shelby GT350/GT350H / 1966 GT350 front sway bar paint/markings
« on: January 22, 2019, 10:00:19 PM »
Was the anti-sway bar color semi flat black and were there any color paint markings, dabs, stripes, etc..  on the bar? Thanks in advance

9
1966 Shelby GT350/GT350H / Windshield wiper pump, 1966
« on: October 25, 2018, 11:12:20 PM »
Can't seem to get my windshield washer pump motor to work, only getting 6.5 volts to it? The wipers run two speeds, the pump works fine with 12v. Any input appreciated.

10
Misc. For Sale / koni shock shafts
« on: October 19, 2018, 10:23:01 PM »
I have two spare Koni shock shafts that will fit 1326/1388.  These are new, chromed hardened steel, machined with correct sized oil passages, threads, etc. I had 8 made for a few shocks I rebuilt. $400.00 for the pair.

11
1966 Shelby GT350/GT350H / Radiator coolant information
« on: October 12, 2018, 09:06:00 PM »
Hello,

There is a radiator coolant information sticker, starts with "IMPORTANT" that I have seen on many cars. Should this be on the radiator support of a mid to late '66 GT350 ? If so, where should it be placed on the support? Thanks for any info. 

12
Concours Talk / Spark Plug ID tags, 1966 GT350
« on: August 30, 2018, 10:40:33 PM »
Saw for sale on eBay;

"Spark Plug Wire I.D. Tag Set (Pair) for 1966 289 Ford Motor Company Products.

Tags are located on either the #1 or #4 plug wire (Passenger Side) and on the #8 wire (Driver Side). They are placed after boot at distributor cap."

They are marked C6AF-12280G.

Never have seen these in pictures of original cars or discussed? Should these be present on a 1966 GT350? Other years offered too. Any comments appreciated.

13
1965 GT350/R-Model / Speedometer gear
« on: June 23, 2018, 08:21:32 AM »
Does anyone know the stock tooth count (3:89's / Blue Dots / T10M) of the driven gear for the speedometer? Thanks in advance. 

14
About to weld the front mount. Does the weld run the entire perimeter of the bracket? Thanks in advance. 

15
1966 Shelby GT350/GT350H / Under-ride bar length
« on: May 14, 2018, 08:05:03 PM »
I have seen many length's, but is there a consensus on the total original bar length?  Thanks in advance

Pages: [1] 2