SAAC Forum

I would put the clips in first confirming they fit on the posts, sometimes exsesive paint build up will need to be be trimmed to fit them properly.
Original/NOS clips are the best. Windex is a good lubricant to use.

SAAC Concours judging for 65 Shelby there would be a deduction for a side mirror.

No side mirror for 65 Shelby

Quote from: shelbydoug on December 15, 2023, 07:19:13 PM

Quote from: Bob Gaines on December 15, 2023, 04:35:30 PM
Information like this is all in the chassis manual of the assemblyline manual set. They have saved me many hours over the years plus answer many questions i was investigating.  I would think that you would save time and stress by investing in a 67 and also a 68 version given the year of car topics you typically post on. Buying the set of available manuals for a given year was my personal choice.

True but then that information would never be covered here at all? It isn't just about me. It's about others seeking that information as well from the wiser and the much better informed. 

+1

This is my GT 500 sold new in California so it would have thermactor. Smog system is not present, but still have whats left of it.

Quote from: TLea on September 26, 2023, 06:11:54 PM

Quote from: Rbwiii on September 26, 2023, 03:31:59 PM
Red KR 4 speed with Air sold for $265k

Must have had a good broker 


The Greatest!!!!

Red KR 4 speed with Air sold for $265k

+1

PM sent

Sounds like the floats are stuck on the carberator,this happens to me alot when i don't regularly drive the cars. Take a soft headed hammer and  tap both float adjustment screw cover caps on the carberator four or five times. Should solve the problem.

You need to locate your local guy that performs clear wraps. They have many pre-cut patterns avaliable they can cut, typically for exotic cars, not sure if a 67 Shelby is on the list. My guy performs the installation free hand on the front clip of my exotic cars and he just does the lower quarter panel and interior sill area on my Shelbys. Free hand is a cleaner installation because it doesn't leave a line.

Very cool!

My 68 KR from Colorado had a emblem on the deck lid, my 68 500 from Pasadena had license plate frame.

Quote from: Special Ed on February 03, 2023, 09:07:09 PM
talk to charles turner he lives it that area.

Yes, Charles would be a someone I would suggest for 66 mustang....

+1