SAAC Forum

Pm sent, Roger

Time to let loose of a very nice wheel I took off a wrecked 66 Hertz car probably 40 yrs ago? It has a small crack at about the nine o'clock position, it was there at removal and has not changed. all parts solid with very good chrome. You can buy a new one for less but IMHO they can be spotted from 10 feet! Asking $650.00   plus shipping.   Roger

Sold,  thank you again to all that responded

NOS never mounted AC compressor, I do not have the original box, there are some areas where the factory paint has been worn off from handling. I have had this for 30 yrs.  $600.00 plus cost of shipping,  Roger

Ok, $600 too much, how about $500.   Roger

Several years back I refurbished my original bj/bk carbs including replating and recoloring where needed. While they are not going to fool anybody as far as assembly line appearance, I was pretty happy with them. After lots of tinkering, I got them working well. As stated earlier in this thread, they work amazingly well once you get them dialed in. I decided to buy a set of the new issue BK/BJ carbs from Branda, and put my original ones on the shelf. After installing the replacement set, I found basically no difference in the way the engine ran, so I thought I must of done something right on the rebuild.
These carbs went right on without any alteration to the orig configuration, easy deal! While they are a little spendy, and not spot on in appearance, they fall in the category of " They worked for me"

Another problem may be causing some of your issues. There appears to be the tell tale signs of discoloration in the inside of the air horns, indicating a presence of backfire, which may have taken out the power valves.

I have a very nice original C7ZX manifold all cleaned up and ready for service,had it for many years.
$1500.00 plus ride.  Roger in Spokane Wa.



Sold

Was there any other applications the coolers were used on besides Shelbys?

Jason, I have a nos 68 ac compressor, no box ,but as new. Let me know if you still need one,

Roger

    Thank you Mr. Gaines for info on pulley, I was buying it for backup on my 500 and of course would still take it, but if someone can really use it , I would step aside, please let me know, Roger

Hello,  I will take the part, please advise of shipping cost to 99206 and also method of payment,  Roger

Hi Stephen,  I have a nos 68 compressor if it would work for you. Let me know and I will dig it out for photos and price.  Roger Mitchell in Spokane.