SAAC Forum

I would be intrested in The door panels, Bob

I'm wondering whats correct for a 1967 Shelby or mustang? from the dealers

Ok can you take a measurement  not from the center say in 2 places.. latch on  trunk lid does want to clear latch on body.

  I need to know the opening width on 1967 mustang fastback trunk from inner edge to inner edge of tail light metal I get 15 inches. I know this not a Shelby.
Thank you Jess

I need to know the opening width on 1967 mustang fastback trunk from inner edge to inner edge of tail light metal I get 15 inches
Thank you Jess

HI, Did the GT350's use a cooler for power steering,  motor oil? if so could use a photo or 2 on hose routing.
Thanks, jess

What style is correct for my 67 GT350  build? the Oval  or the pricey  Hipo round air filter? Trying to make it look correct
Thanks

I working on my clone and I'm using a ford mini starter.I don't like the idea having it hot all the time.Question is do people fuse this and  what type?  How to wire using harness to dash?
Thank you

Have you talked Jim Marietta he worked for Shelby he states  he might have some info

I'm going to do my Amp meter wiring. But I'm using the ford mini starter with the solenoid for it.  I also have the after market amp lug holder on firewall (Branda item )
How to connect wiring to it?

yes at the outlets thank you for the measurement

Hi,
I'm working on my 67 replica and I  need a measurement on the back section of "H" pipe center to center= trying to set transverse muffler as this would help, Oh I forgot pipe is 2 1/4
Thank you,
Jess

HI,
I building my 67 289, Should I use a original 3 core Radiator or use a newer Alum. Type? I would like to keep a fan shroud and I'm using a Hipo Fan.
Thanks,
Jess

Hi,
I'm work on my 67 and I have a problem. It has factory Disc KH hays calipers. It seems like my hoses are to short to reach frame mount I did the arning drop and the car is on  jack stands. Hoses measure 15 inches long. Any Idea's whats going on and how to correct?

I'm working on a 1967 fastback and it has the tilt-away column and the  Midland brake booster. What brake line do I use the one that goes over Column or under it? for across the firewall.  There is  2  styles.The car has stock disk brakes.
Need some help here  as no brake line was with car.
Jess