SAAC Forum

Hi all,
I was wanting to replace my axle bearings and where am I wrong?
I ordered skf bearing RW 207 CCRA which is supposed to be correct but the I.D. of
the bearing is 1.377 and the axle diameter where it is pressed on is 1.365 obliviously
not going to press on.  could anyone suggest a brand or know what part I need? 
The axle seal seems to be the correct size and I think it will seal , just completely
confused , any help would be greatly appreciated.
Dave

Hi All,
does anyone know the total production breakdown of 1966 Shelby by colors?
it may have been asked before but I don't remember seeing it. It  would be interesting to know.
Mine is sapphire blue just wondering how that color compares to the others.
Thanks,
Dave

for sale:
Partial case of NOS Autolite 45 resistor spark plugs , they are about 30 + years old.
but in new condition.
The case contains 8 boxes of 8 plugs each.
Asking $100+ shipping for all.
Please send a pm if interested and I can provide photos as needed.
thanks,
Dave

65-67 289  black cobra open letter valve covers. These are very nice aftermarket designed to clear most roller rockers
with gaskets briefly used but in like new cond. NPD gets $212 w/o gaskets
$100 + shipping
I am not good at posting photos but happy to send any desired if requested.
please send  a P.M. if interested.
Thanks,
Dave

Hi All,
I have 2 nos power steering hoses for sale one the the pressure hose the other is return.
p/n C5ZZ-3A719-D  ,  C5ZZ-3A713-D  these are ford parts for 65/66 mustang.

Asking $115.00 +shipping for the pair. Please send me a P.M. if you are interested i will provide
necessary photos.
Thanks ,
Dave

Hi All,
  I just noticed a n.o.s center cap for sale and it looks like the
background color behind the logo is black .  I have not ever noticed this,
is that the way they all came?
Thanks

Hi all,
just noticed a 1966 black/gold Hertz tribute car on Ebay that is represented as true
k code but has a Shelby Vin tag 6S514   I would think the real 514's owner might not be
thrilled about this.

Hello,
I have a newspaper clipping classified ad from the 1979 L.A. Times newspaper.
One of the ads shows cobra CSX2403  for sale.  If you would like a photo of it I would be happy to
send you one. Just drop me a PM.
Dave

Morning all,
So my 66 GT350 is pretty well restored but the leather fobs on the belts
are looking a little tattered  , I have been a little reluctant to touch them as they are
the originals but have thought about restoring the leather what would you do?
Thanks

Morning.
65/66 hipo air cleaner bottom original,( bottom only). good restorable cond. paint chips etc. needs refinishing. Date 5A
$250 or best offer.
65-67 289  black cobra open letter valve covers. These are very nice aftermarket designed to clear most roller rockers
with gaskets briefly used but in like new cond. NPD gets $212 w/o gaskets
$140 + shipping
I am not good at posting photos but happy to send any desired if requested.
please send  a P.M. if interested.
Thanks,
Dave

Hi all,
I am getting ready to sell a few leftover parts and am trying to determine
the value for a original hipo air cleaner bottom (bottom only).  it is marked with I believe to be
5A can't find any other markings  and has the nipple for the hose connection and a dimple is present
on the bottom side as well .  Not trying to get rich just wondering what the price range might be.. I would call it good cond.
but has paint chips etc and needs to be refinished.
thanks.

Hi all,
I am getting ready to sell a few leftover parts and am trying to determine
the market value for a original hipo air cleaner bottom .  it is marked with I believe to be
5A can't find any other markings  and has the nipple for the hose connection and a dimple is present
on the bottom side as well .  Not trying to get rich just wondering about what to ask. I would call it good cond.
but has paint chips etc and needs to be refinished.
thanks.

Is it just me or does anyone else think its in
really poor taste to say the least that Craig Jackson comes
down from the auction block to bid against his paying customers on
a car he wants?

Hello,
I am trying figure if my temp gage is reading correctly?  It is reading much farther to the hot
than any of the several mustangs and shelbys  I have had have read.  It could be sending unit or thermostat
but what i am wondering is I purchased a laser temperature gun when the engine is fully warmed up
where should I really point it to get an accurate measurement? .
thanks much!

Hi All,
I was wondering if a malfunctioning gage voltage regulator could
cause the gages to read incorrectly i.e. too high or too low.
Thanks for any help.
Dave

Hi all,
so my 66 gt350 came with painted magnum 500 wheels, just wondered
when new did the spare tire have a matching wheel ? or was it just a steel wheel?
Thanks much

  Some people are using the Ford Ranger 10x2.5 drums, shoes and wheel cylinders
because they could not find the mustang ones .  When doing so is the standard
E brake set up and brake hardware from the 66 Shelby still the same?
Thanks much.

hi all,
I am considering purchasing a 66 GT350 .  Looking for a very nice clean solid driver or
local show type car , no trailered type cars please.  Must have untampered VIN's and original Shelby tag.
original engine. Privately owned cars preferred. Logistically it would be nice if you are western U.S.
My budget is open to discuss when I learn about your car. I have owned and restored a few Shelbys and Mustangs
so will know a nice car when I see one. I am asking for a few things but it never hurts to ask. I am really
in the thinking about it stage, if you are thinking about selling I would be happy to discuss.
Please send me a PM if interested.
Thanks,
Dave

Hi All ,
would anyone have an estimate of the percentage for 1967 GT-350 4 speeds produced
v/s automatics?  I am guessing more automatics.  Please don't make me count them all in the registry.
Dave

hello,
I you currently own 66 Shelby # 6S1177 or 6S2329 I would
like to chat with you when you have time . Please drop me a P.M.
Thanks ,
Dave