SAAC Forum

The relay is fastened to a bracket that's an integral part of the firewall.  For orientation,  in this photo you can see the parking brake mechanism on the left side of the photo.

Many these will help.

I recently bought a TMI and a Distinctive to compare color.   I then gave both of them to my headliner guy and told him to make the choice.   I told him quality was my first priority...but if all thing were equal,  then i would prefer to use the one that most closely matched the color of my original.   He said both were of good quality so he ended up installing the Distinctive for it's darker black color.   It matched my original visors nicely.  BTW,  i still have the TMI in it's original box if you're interested.

Matt,  i'm interested in one if you don't need both.   Thanks,  Adrian

Have used Lykins Motorsprts several times for custom cams ( FE and Boss 302).  Brent very knowledgable with lots of dyno experience.   Good vendor

Thank you sir.  I'll adjust game plan accordingly.

Reviving this thread with photos/questions about my Lucas fog lights.

Were on the car when bought in '79.   Now assuming not originals (2/28/69 build). Some differences vs. others in this thread are:

Mine have
1. 'Made in Italy'  on lenses and bulbs
2. Exposed ball pivot
3. Single wire (rather than 2) exiting body
4. Apparently grounded internally

Welcome comments/suggestions  

Thinking of retrofitting 2-wire repo pigtail harness.

Google c9za-18490.  At least one of them currently listed on ebay

Bummer

J-Joseph,   My photos from disassembly aren't posted online.  Many of them are close ups that likely need an explanation to give context of what the photo is showing.  I'm happy to be the librarian and pick and sort through them to find which photo is/ are applicable to your task at hand.  Others here also have many.

If needed,  i have many dozens of photos i took during disassembly of my 69/70 GT500.   A lot of helpful folks and knowledge on this forum.

My tail light panel has no numbers anywhere on it.  Just inspected it while off the car and found no numbers.  I can't say with absolute certainty it's the original,  but it was on car when i bought it in '79.  It's pink glass with grain texture. 

Ed,  do you happen to have any stencils left ?  I'd be interested to purchase ..even if only a single side of one.  Thanks. 

Wondering if '70 hood stripe stencil is available for purchase from any source ?

Thanks
Adrian Jacobs

Here's another example. Note: I sourced this apron from a donor Mach 1 to replaced the incorrect one that was installed on my car in the 1980's.  So i can't verify the specifics of the car this apron came from.