SAAC Forum

I have a NOS sequential tail light flasher for an early 1968 Thunderbird or Cougar for sale.  This is an early piece which is considered cars built before 11-6-67.  This particular piece of the sequential light setup is located in the trunk.  It is brand new original Ford and in very nice condition. The part number is C8SZ-13A366-E. Price is $175 plus shipping.
Pictures to follow.

I am looking for a set of 289 K code exhaust manifolds. They must be useable with no cracks or repairs. I am looking for a date prior to March of '65 but no 63 or early dated 64's. I will consider 66's also. Please PM me if you have a pair to sell. Thanks.

I am looking for a '65 Mustang GT grille in NOS condition or one in very nice condition. I have a standard '65 Mustang NOS grille in  to use as exchange or I can buy outright. If you can help, please send me a PM. Thanks.

I have a pair of '67 Shelby sill plate labels for sale. These are in the Ford box and are in very good condition. Picture below. Price is $100 for a pair. Thanks.

I have a '68 automatic shifter handle. I am not sure if it is an original or if it is a reproduction. One thing I can tell you is that it has a set screw on it to tighten it on. Did repop's have this or is it an original ?
I will try to get some pictures up tomorrow.
Thanks in advance for any help I can get.

I have a pair of '66 Shelby rear side window frames for sale. These are original pieces with a C5ZZ stamping on the back of them. These were painted white by a previous owner so the they would need stripping and repainted black. These are in fair condition and will need some work to make them perfect. Price is $325 for the pair plus shipping. Thanks.

I have a '71-'73 ram air plenum for sale. On the top is FORD and D1ZB part number.  This mounts under the hood on a '71-'73 Mustang. There are no cracks or damage on this piece. Nice piece for $375. Email gandcmurphy@rogers.com if interested and want more additional pictures. Thanks.

I have an original '69 GT gas cap for sale. This was used for only the '69 model year. The cap opens and closes with no problems. On the back of the cap, it is stamped, AUTOLITE 9A112-A. and XO-1932. This cap would have to be used as a driver cap as it has plenty of hazing in the chrome unless it gets rechromed. Price is $150 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have 3 am/fm radio's for sale.

The first is a 65-66 Mustang am-fm radio. This radio is in working condition and comes with the radio knobs. All buttons work, the dial changes the station along with the buttons and the am fm slide bar moves freely. All wires are present and have not been cut. This radio also comes with the mounting bracket. This radio was working when removed from the car. The radio is stamped F6TBZ  OO1932. Price is $1500 plus shipping.

The second radio is for a 67 Mustang. This radio is also in working condition with the radio knobs being present also. All buttons work, the dial changes the station along with the slide bar moving freely. All the wires are present on this radio but they were cut at one time and have been repaired. This radio also comes with the mounting bracket. This is a working radio. This radio is stamped F7TBZ  005519. Price is $850 plus shipping.

The third radio I have is from a '70 Cougar but could be used in a Mustang. I do not know if this radio is working and the knobs are missing along with the wires being cut. The slide bar moves freely and the knobs all work. It has had a sticker put on the radio but you cannot tell as the old numbers and the Cougar were wiped off. The radio is stamped D0WA  19A241. Price is $400 plus shipping. Thanks.

Email gandcmurphy@rogers.com if interested in more pictures.

I have a NOS upper shifter boot for sale. The boot has the Ford part # of C5ZZ-7277-B which is still on the part. This boot has a tear on the underside of one of the ribs though which can be seen in picture #3. Otherwise, in excellent condition. Price is $125 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have two ten spokes for '67 Shelby that need restoration. A previous owner had sandblasted them so the finish is gone on all of them. These will need buffing and painting to bring them back to original. These  have the S7MS part # on the back in one of the spokes. Price is $800 plus shipping for the set. Email gandcmurphy@rogers.com for more information. Thanks.

I have a nice set of Boss 15x7 rims (4), trim rings (4) and caps (4) for sale. The rims are in nice condition and have Ford stamping on the center hub. The trim rings are almost perfect. The one ring has a small 1" scuff while the rest of them have some very minor where. They all have the remains of the original ford sticker and I can make out DOZA 12xxx-x on one of the stickers. The caps are probably the worst with a couple having small dents on the side and all 4 having some very small pry marks on them. The part # on the caps is D0ZA-1130-J. The price is $2600 for everything. Email gandcmurphy@rogers.com for more information and pictures.

I have a '68 GT500 carburetor that needs rebuilding for sale. The carb is stamped C8ZX-9510-A  LIST 4129  7A4 on the air horn. Everything moves freely on this complete carb. Price is $2000 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have 2 pair of NOS rocker panel moldings for 65-66 Mustang. These panels are in excellent condition. The paper packaging is not in the greatest shape but it is there. I also have 3 of the 4 end clips that go with the first set that is sold. These have part #'s of C5ZZ-6510176-A and C5ZZ-6510177-A. Price for each set is $350 plus shipping. Email gandcmurphy@rogers.com for more information and pictures. Thanks.

I have 3 NOS Shelby/Mustang gas caps for sale. They are:

1) 67-68 Shelby NOS pop open gas cap for sale. This gas cap is in nice condition but does have a few small marks in the chrome. The part # on the back is C7ZA-9A112-B. this gas cap has no emblem affixed to it so you will have to be purchased to put on it. A Mustang GT will also fit on this cap. I do not have the original box. Price is $225 plus shipping.  SOLD

2) The second cap I have is a 67-68 NOS pop open GT gas cap. This cap is in excellent condition and comes in it's original Ford box. The part # on this one is C7ZA-9A112-B. This cap comes with a smaller cap on a chain and directions how to install. Everything is in excellent condition. Price is $200 plus shipping.  SOLD

3) The third gas cap I have is a NOS '68 Mustang pop open gas cap. The part #on the Ford box is C8ZZ=9030-C. This cap is the running horse with black background and chrome extensions on each side. This cap has some vlt hazing around the outer chrome ring. Otherwise, in excellent condition. Price is $200 plus shipping.

If interested in any gas cap, email gandcmurphy@rogers.com  Thanks.

ALL GAS CAPS HAVE BEEN SOLD  Thanks.

I have a NOS trunk mounted light for sale. The original Ford box has part # C2RZ-15A700-A. The light is in excellent condition and comes with a bulb already mounted inside. Also comes with the mounting screws which are in a Ford bag and the directions on how to mount and wire the light. This part is in excellent condition. Price is $75 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have a pair of NOS 65 -66 hood pins and a pair of NOS clips that go in the hood pins. These parts are in excellent condition . The clips both open and close freely. I don't have any of the original bags as I bought some other NOS parts and these were included. Price is $125 for the 4 pieces. Email gandcmurphy@rogers.com if interested. Thanks.

SOLD

I have a nos 69-70 Shelby hood pin kit for sale. It only has 1 nos lanyard instead of two. The parts include two nos pins, two nos plates and two nos latches.I only have the plate bag which is C9OZ-16N782-A. These were bought from a Ford dealership in the late 70's. All parts are in excellent condition. Price is $350 plus shipping. Email gandcmurphy@rogers.com for more information. Thanks.

I have a '67-'68 Mustang 390 carburetor that needs rebuilding for sale. This carb is stamped C8OF-9510-C, LIST 3795-1 and a DATE of 793. The carb is complete other than the choke cover. Everything moves freely. The butterflies on the bottom both open up. A rare carb for a rare motor. Price is $175 plus shipping. Email gandcmurphy@rogers.com for more information.

I have an original ram air cleaner from a '71 Mustang and a 351 engine. The piece is in original condition as it has never been touched as I got it from a guy who had it stored in the attic of his garage for many years. The rubber seal on the top is in good condition and is soft and pliable with no tears. The blue portion of the air cleaner could be used as is or it can be painted and detailed. The flapper also works. Price is $650 plus shipping. Email gandcmurphy@rogers.com for more pictures. Thanks.

SALE PENDING