Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - hertz350

Pages: [1] 2 3 4
1
Wanted to Buy / 65 66 Fastback passenger side upper roof rail sash metal
« on: September 30, 2022, 01:46:27 PM »
Looking for a Ford oem 65 66 passenger side upper roof rail sash. This is the piece that goes on first before the stainless steel piece that holds the weather-strip. weather-strip channel. This is the metal channel that is riveted to the roof above the door window.

I thought I found a good one but it is reproduction and does not fit correctly.

This is a revised repost.

2
1966 Shelby GT350/GT350H / Wing Window Glass Seal
« on: September 22, 2022, 05:57:53 PM »
What are people using for the rubber or butyl seal that goes on the wing window glass where it attaches to the stainless steel trim?

3
1966 Shelby GT350/GT350H / Stance for 66 Shelby
« on: May 13, 2022, 09:21:07 AM »
Looking for measurements from the pinch weld to the ground in front and at the rear of the rocker. Wanting to verify factory assembled ride height with stock wheels. I do recognize that the vehicles did not leave the factory with a full tank of gas which will effect ride height. Really looking to see if there is any difference from front to rear.

4
I am looking for close up pictures of original 66 Shelby hood pin clips for a car built in March of 66. Thanks in advance fort he help.

I have seen some that say made in Denmark. Are those reproduction?

5
1966 Shelby GT350/GT350H / 66 Grille Finish
« on: April 22, 2022, 07:30:04 PM »
Is the '66 grille finish the same as all '66 Mustangs? (Except that the edges of the grille where the horse and corral were mounted have had the black finish removed on the leading edge to match the rest of the grille?)

Thanks.

6
Wanted to Buy / 65/66 Fastback Roof Rail Metal Channel
« on: April 08, 2022, 04:23:49 PM »
Looking for an original Ford 65/66 metal channel for the passenger side fastback door window opening. This is the first piece of metal that mounts to the car  before the second piece of metal channel is installed that holds the weatherstrip.


7
1966 Shelby GT350/GT350H / Rear Valence Tie Down Sticker?
« on: March 31, 2022, 10:34:09 PM »
Did the 66 Hertz Shelbys with stripes built in March of 66 have the decal on the rear valence regarding removal of tie downs? Or, was it removed during the stripe painting and then not replaced?

8
1966 Shelby GT350/GT350H / 65 66 Door glass trim removal/installation?
« on: March 29, 2022, 06:32:19 PM »
I would like to know what suggestions members have on removing the top of door window stainless trim for 65/66. It looks like Ford San Jose used a rubber seal and maybe glue.

So the question is how to remove it an replace it on a new piece of door glass?

I have not seen the rubber seal listed in the manuals or in after market parts catalogs.

Thanks!

9
Parts For Sale / 66 Original Dash Pad (SOLD)
« on: March 26, 2022, 08:39:48 PM »
Original Shelby Dash Pad. Very Nice shape. $60 plus shipping. (SOLD)









10
Wanted to Buy / Looking for a NOS C4 Transmission Oil Pan
« on: March 08, 2022, 08:54:31 PM »
WTB: NOS Ford unpainted C4 transmission pan. Not interested in reproductions by Scott Drake or others.

11
Parts For Sale / 1966 GT 350H Stipe set for sale
« on: March 07, 2022, 05:33:33 PM »
I have one set of 2 gold stripes and letters for the 66 GT 350H in an unopened box. I purchased these from Mustang Masters. These are now about $140 plus shipping for the ones Branda sells. Most other places have them for less but they appear to be out of stock.

$75 including mailing. Payment by check or PayPal friends and family.

12
1966 Shelby GT350/GT350H / Hertz factory applied stripe questions
« on: February 20, 2022, 12:58:17 PM »
Questions on SAI factory painted stripes:

Did SAI remove the windshield and back glass stainless trim before painting the stripes?

Did SAI remove the bumpers before painting the stripes?

Did SAI remove the wiper arms before painting the stripes?

Are there any historical pictures of the process?

13
Looking for help on these questions:

Stainless trim around gas pedal pad?

Finish color of the steel trans cooling line fittings at the radiator?

Rivit color on interior quarter window panel black plastic trim?

Correct number on running horse mounted on grill. C4ZB?

Thanks for the help!




14
Wanted to Buy / Wing window rivit tool
« on: February 19, 2022, 12:40:22 AM »
Looking to borrow or buy a used rivit tool for installing the wing window rivits.

15
1966 Shelby GT350/GT350H / Trans cooling line brackets?
« on: February 14, 2022, 03:28:35 PM »
Hope its okay to use the word trans. Anyway, looking for pictures for if/how the transmission cooling lines attach to the block or anywhere else on a 66 Hertz car.

Also, were the line fittings installed in the radiator left natural finish or were they painted black as original from San Jose?

Thanks!

Pages: [1] 2 3 4