SAAC Forum

wanted front shock lower mounting round rubber washers...need 8,either good used or nos,fit multiple years...my shocks are autolite (blue) on a 69 shelby...thx keith 318-393-1502

need one original 69 gt350 exhaust adapter...short pipe goes from tailpipe to exhaust collector....need an original ,will buy 2 if you have a pair ...thx keith 318-393-1502

Wanted original 69-70 gt350 tailpipes..thx keith 318-393-1502

Wanted 1969 mustang driver's side black kick panel...need a good original...thx keith 318-393-1502

need two original mustang tie rod boots(metal ring,c8 numbered)...were used in 68-approx march 69 ...want either good used or nos,dont have to be mint...dont want the reproduction ones...thx keith 318-393-1502

Looking for an older 69 shelby stripe kit in gold,  the new kits gold color is too bright,just need some for repairs so any partial is good from fastback or convertible kit. Thx Keith 318-393-1502.

wanted...i need original 69 mustang backup lens.....thin ones...need 4 total...thx keith 318-393-1502

need some nice  original front z7zd blue autolite shocks dated 9AA,B,C D OR E THRU 9BA....thx keith...buy outright or trade ones dated in early 68....keith 318-393-1502

wanted original autolite round solonoid c7 or c9 version dated 9AB thru 9BA...thx keith 318-393-1502...have other dates if someone prefers to trade..thx

wanted carburetor tag c9zf-c dated in 9A or early 9B...THX KEITH 318-393-1502

could someone please post a picture of a 69-70 gt350 autolite carburetor choke shield...thx keith

wanted c9zz-7528-a 69 mustang 351w z bar...prefer nos but would be interested in nice used with good plating....this bar was used on 69-70 mustang 351w manual transmission cars...thx keith 318-393-1502

Wanted 1969 Shelby shocks...z7zd adjustable autolites,dated in 9A or early 9B..need nice originals.looking for fronts but will also buy a set....thx Keith 318-393-1502

Wtt...z7zd front shocks dated  early 68 for ones dated in early 69...or will buy outright...need nice originals.. adjustable autolites..have other shocks to trade or buy outright..thx Keith 318-393-1502

need original 4spd. bellhousing to block bolts for a 69 351w (gt350), they are 5/8 head solid head with no marking on the head...2 1/4 to 2 1/2 long(under head) with shank under the head followed by course threads...i believe used 67-69 at least, need 4 original bolts...thx keith 318-393-1502

wanted a set of original 69 351w 4 speed bellhousing bolts to block...2 shorts and 4 long...hex head non indented...usually have 3 slashes and marking like F or m or TR and more. thx keith 318-393-1502

wanted a set of original 69 351w 4 speed bellhousing bolts to block...2 shorts and 4 long...hex head non indented...usually have 3 slashes and marking like F or m or TR and more. thx keith 318-393-1502

Wanted original rear backing plate plugs...need one bendix..8a and one kelsy Hayes...crosshatch...would like nice used or nos...these are for rear brake backing plates on a 70 Shelby gt350..9 in with 28 spline...thx Keith 318-393-1502

Are there any markings on an original 9 inch ,28 spline ,vent hose clamp on a 70 Shelby gt350.have my original and can't see any...just want to confirm,thx keith

need clarification on 70 shelby gt350 rear backing plate plugs...i have one KH and one Bendix backing plate...which type plug(8a or cross hatch ) goes on which one and which bolts (recessed head or solid ) goes on which backing plate wheel cylinder. when i disassembled(rear backing plates and wheel cylinders) i got the bolts mixed up. i know the cylinders are 7/8 and same right to left....have seen originals with two different type markings...one with about 5-6 numbers like a vendor code and others with number like 1a and nothing else...was there two suppliers? thx keith if someone had a picture of original wheel cylinder would help...thx again keith...also where the wheel cylinder boots all marked with kelsey hayes