SAAC Forum

Looking for complete 68 J code engine, non thermactor heads dated between 7/68 and 10/68
Email direct TimothyLea7@gmail.com

When did distributor caps change from just 1 to Autolite?

looking for a vintage engine bay photo, 350 no ac or thermactor

I have 2 brand new from ECS front windshields that are for 69 hardtop. They are tinted with band and date code etched both 9B. They were supposed to be for convertible but they shipped wrong ones and don't want them back. Let me tell you how this will work. Both windshields are in same box and it is large and heavy. I will give you weight and dimensions and you will send me a prepaid shipping label. If you only want one you get both and you can pay it forward to someone else.

Ford used both styles, which is preferred on early 350?

I would think this has been discussed before but I was thinking about it today. The cars left SJ as running driving cars with full exhaust systems. The early 67s had the non GT rear valance w/o the dual exhaust cutouts. How did that work as tailpipes run through valance. Did SJ cut the openings?

On an AC car there are 2 large washers that go on firewall side of AC/heater box. Can anybody get me a measurement (outer diameter)?
Thanks

Selling for customer. 68 # 3876. Long time owner always maintained well. True red, saddle interior, white top 428 cj/automatic with AC. Good honest clean driver, no rust/sheetmetal issues. Original drivetrain, runs great. Just had at our shop for engine detailing, new top, seats etc. Everything under the hood that was incorrect was addressed. AC system rebuilt including interior boxes, blows cold air and heater works perfectly. New power steering hoses, pump/ram/valve rebuilt. If you are looking for no excuses fun car to drive this is it. Asking $220K. Photos taken in my storage building  so not great but will take out and photograph for serious buyers. Fly in, drive it put it on our lift and inspect. Email or call directly TimothyLea7@gmail.com
401-263-3450

I need the 2 L shaped chrome ones. All studs must be intact. Minor pitting Ok  TimothyLea7@gmail.com

email direct timothylea7@gmail.com

Either model, I don't care about the foil parts just looking for a solid base that's not damaged Must be plastic and OK if yellowing or weathered

Doesn't need to be nos but working and presentable

Need nice pair, extractor grille condition not important but fiberglass is
Email direct. TimothyLea7@gmail.com

dated late 6A-6C. Needs to have good thumb print

Need a nice one w/o damage  No C8 versions please  Email direct TimothyLea7@gmail.com

Looking for a nice clean unbroken one. Email directly TimothyLea7@gmail.com

On the 67 I'm working on it has fine thread pellet lock nuts. Is that correct?

Email directly timothylea7@gmail.com

email directly timothylea7@gmail.com

Can someone post a picture of their 67 trap door catch, this is from 68