SAAC Forum

R servo 428 cobra jet servo and piston, comes as pictured. $500 shipped lower 48.

Jan 26 of 1970 428 Cobra Jet water pump. Turns as it should no real issues needs rebuilt I'm sure. $100 shipped lower 48.

As the title says I have a 7M8 std bore 428 block . It has an assembly date of 7M21. Which is supposedly the days Ford assembled the engines for the 135 cars. It would be perfect for a 135 car or a early 68 Shelby. It does have a vin stamp on the back and is out of a big Merc car. It has been cleaned and magged and checked out good. No real issues cylinders look good . One odd little repair of some sort possible factory in the lower side of the pan rail shown in picture. There is nothing on the inside at all where this is at. So that's why I say not sure what it's there for . This is a very nice and desirable date code and fits some real rare cars. Picked up in middle TN or buyer sets up shipping $sold pending funds

Nice set of used 427 low riser steel stands adjustable rocker assy. Shafts look decent see no other issues. $325.00 shipped to lower 48.

Nice used condition no issues. $sold shipped to lower 48

C90X 9424 B intake no name front  on front pad. No issues that I see comes as pictured. $SOLD shipped.

C5ZF C autolite 4100 289 4 speed carb. 1.08 Ventura no issues will need redone, but very hard to find 4 speed carb. Comes with correct spacer. Comes as pictured. $sold shipped to lower 48.

C9AF 9510 U 428 CJ  service replacement carb dated 384 .Missing the original tag. Correct GTA cover on the choke no known issues. Needs complete rebuild. $sold shipped lower 48.

8E dated FE factory water pump. Not stuck but I'm sure needs to be rebuilt. Great date for a 68 1/2 car. $sold shipped lower 48

428CJ flywheel good ring gear , needs to be surfaced again but looks good. $sold shipped to lower 48

Just as the title says 6 inch aluminum SAAC Cobra plaque. Says 1975-2000 . Also 13 SAAC dash plaques and one cobra hat pin. $SOLD obo shipped lower 48 states. Pictures show condition so please look them over.

I know it's not super old, but found this and some SAAC dash plaques. Never saw this before. It's about 6 inch circle cast aluminum says SAAC and cobra and 1975-2000. Any value? Thanks Lance

Very nice condition , not all pitted up like most part numbers very clean. Clean inside and out . Has a plug in speedo hole. Part number RF-C8OP-7A040-A $SOLD shipped to lower 48. PayPal as a gift preferably or postal money order or check. I hold everything till check clears. Ship next day in all other payment types with tracking and full insurance.

Jan of 1970 428 CJ intake manifold. Nice intake , no repairs or real issues. Has a pipe plug in the very back not sure why it's there but it is. Came from a running engine . No heat shied. $SOLD picked up in middle TN.

Just as the ad says super rare Cobra sbf roadster oil pan. No issues or repairs , needs cleaned up and restored. $SOLD obo  shipped to lower 48.

Selling this for a friend who is not on the net. It is a complete Italian Weber set up for a Boss 302. He  doesn't know a ton about about the set up . Set up was removed from a running car a few years ago , so assume the carbs will need at least gone through. I have taken pictures of the tag and the number stamped in the bottom of the carbs. They are 48 IDA Weber's with a Inglese sticker on the front. No markings on the intake manifold at all. Appears to be no issues or repairs and looks to be unported. This is not mine , again only trying to help a friend move it . If you wish to speak directly to him or need more pictures please call 615 nine seven one  94six8 , ask for Dan. Asking $4500.00 obo shipped to lower 48 , or knock the shipping off if picked up locally.  Sold pending funds.

Just as the ad says I have a 7G dated C60E 6394 D bellhousing . No issues at all on the bell housing or repairs. The clutch fork retainer has had some welding not sure why, so might replace it. $sold shipped to lower 48 states.
 

These are mine pretty nice looking set . No real issues I see other than the inside baffles where removed for roller rockers. Also the valve cover with the grommet  has the slightest little pin holes in the very top fin, not sure what the deal is. If it was a repair is was a well done job. Look over pictures well they will come as pictured. These are not perfect , but considering the age there pretty nice. Has the Buddy Bar cast inside Will need complete restoration for a restored car. $sold shipped to lower 48.

These are mine, nice used condition. I dropped them off at Ray Sheppards place one the way home from Michigan. Had him pressure check them , leak down was 100 percent , and the decks he said where nice. Appear to have never been cut , very good thumb print. Nice set of pull off heads that are complete. Sold just like that as pictured here. $SOLD obo plus shipping or picked up in middle TN . Sold pending pickup and funds.

As the title says I have a C6ME A A scratch 428 short block . It is standard bore 4.13.  See no issues or repairs on it looks to have been ran at least once since factory . Looks to have 7 original pistons one trw replacement . It is dated 6G8 and assy marked 6H12A . Has a 1u crank and C2 aluminum oil pump. C2 timing cover and a CJ oil pan that I didn't check for a date. Cylinders look pretty good no bad ridge or anything that sticks out. Sold as is where is   , this is all the history I have on it , other than is supposed to came out of NC . Come look at it your self or I can send more pictures. $sold picked up middle TN. I can strap it to a pallet on your dime if you set up shipping.

C5AA 6394 B bellhousing for SBF. I see no issues comes as pictured . Some one drawed a ugly 302 on it, but needs blasted or cleaned anyway . Dated 5th or 6th month  of 65 . $150 shipped to lower 48. Payment will be PayPal FF , please fell free to reach out to me for contact phone number and address if needed. Thanks Lance

Nice used C6OE F fan and after market fan clutch. Has been repainted black. Not perfect but nice straight fan
$SOLD shipped to lower 48.