SAAC Forum

Who makes a GOOD fitting 7mm set of wires for a BB ?

69 CJ going in. But not really. I have the rt side mount to frame where it belongs, x-member is in, wondering if small and big block frame mounts marked the same and if so, is there a noticeable difference between the two? 
This bitch will NOT fit between the frame mounts ! One side will drop in the other just gets hung up and cannot drop into place. Sooo I'm wondering if I got a pair of small block mounts on the frame. New insulators and block plates are properly installed I'm pretty sure (2 bolts to the top).
I have never had this much trouble trying to get one of these muthers set in the car!
Thanks for any suggestions !

Replacing pilot bearing, got one of the rollorized ones. It does not want to fit flush to the crank? Is this normal ? Never used one before , always used the solid brass ones.
Thanks !

I need a water pump C8AE -C
crank - C8AE-D
Alt - C9AF-C
PM with any help please...Thanks Steve

Needing the 2 corner pieces and metal long piece that go on the top of a FIXED rear seat at the package tray

Thanks in advance

Hey guys ,  need a pair of sportsroof  roof rails. Got a coupe pair with the car
Thanks for any help ! Steve

WTB- toploader BB x-member for a 69', also 1 CJ sway bar bracket.

Thanks !

ISO a complete working 69 pump, with brackets and pully for a  CJ

Thanks !

In need of these for a 69 BB car.
Thanks !
Nibrocpapa@gmail.com

Looking for a nice set of 15x7 Magnum 500s

Needing a QRT of PPG Dp 74LF  red oxide epoxy primer .
Thanks Steve
Nibrocpapa@gmail.com

WTB - CJ bellhousing . flywheel, clutch fork.

Thanks Steve
Nibrocpapa@gmail.com

WTB 69 CJ fan w/clutch in good condition.
Thanks
Nibrocpapa@gmail.com

Whats the difference between a Rug A2 and a Rug AZ? Is the AZ a  70 item ? 

Ok, another issue. Doors closed .. connect battery and instantly all the interior lights, side markers and rear tail ight come on. Not Head lights.  I have disconnected the brake light switch, no change, disconnected the turn signal switch harness, no change, just put on a brand new nos HL switch, no change !  Driving me nuts !
Anyone have any ideas? suggestions? known causes, solutions ? Guesses ? Exorcists ?

As always thanks a lot !!
Steve

1- center hood scoop grille, any tricks to install one? Type of adhesive that can be used ?
2- hood pins... replacement kit. Does the polished plate go on the backside of the hood or on top under the spring ?
As always thanks for any insights. Peace

So I was given this plate and this shifter to install in the 69 SCJ I've been working on. However , I cannot find two plate holes , threaded or un-threaded that the shifter will line up with. Am I looking at incompatible components? Top loader of course.
Thanks

I seem to have a mismatch between the Centerforce pieces and the ford clutch arm . Clutch arm is C8OA 7515 B. Throwout bearing is a Centerforce N1493. They are both suppose to be correct , but bearing will not fit the arm. Ive attached a couple of pics. Can anyone explain which is incorrect ?  Thanks !

Does the SCJ adapter take the same gasket as a regular CJ adapter ?

Thanks !

Looking for a suggestion on an aftermarket radio for my 68. Been through 3 Custom Auto Sound units in 7 years. POS in my opinion. Has anyone had good luck with another brand? I know I can send the original out and have it modernized.

Thanks !