News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Vibrations at 50 miles per hour and up.

Started by deathsled, April 08, 2020, 10:53:25 AM

Previous topic - Next topic

deathsled

I get vibration in the body of the car at around 50 mph and up.  It's not terrible and I live with it. My dad suggest wheels might need to be rebalanced.  I am thinking it might be the driveshaft? Those have weights on them too do they not? The shifter isn't vibrating like crazy. All opinions welcome. And thank you gentlemen.
"Low she sits on five spoke wheels
Small block eight so live she feels
There she's parked beside the curb
Engine revving to disturb
She's the princess from his past
Red paint gold stripes damned she's fast"

69 GT350 Vert

You might want to try removing, then rotating, the driveshaft to a different position.  The shop manual describes the procedure for this and proper orientation.   

jk66gt350

Vibrations at only 50 and above is a classic sign of a problem with wheel balancing, so I would agree with your dad and try that 1st.  When you have them rebalance the wheels tell them to also do a run out test or just look for any signs of one or more tires being out of round.  This happened to my 70 Cougar a couple of years ago and it was a small lump in one tire that pretty quickly evolved to a bigger lump and vibration starting at much lower speed due to a belt in the tire starting to let loose. 

prototypefan

An old trick for driveshafts is to install a hose clamp. You then rotate the hose clamp and determine if it reduces your vibration. It's not perfect but a relatively simple approach to narrow things down.

JD

Check the balance of each wheel first. Some (shops) will pull off all the weights and balance, I prefer to spin and see if in-fact they come-up showing an imbalance, how much and where.
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

NC TRACKRAT

I'm with the above on the wheel balance but if you want to check the tires having an internal fault, just run up the pressures on all four to 50 lb. and drive it at or above 50 mph on a smooth stretch of road.  If the vibration goes away, drop the pressure to normal on one tire at a time and run it back up to 50 mph each time. When the vibration re-appears, that's the faulty tire. If you want to get the driveshaft checked, it's a pretty quick, inexpensive and simple process.  Be sure to mark the orientation on the yokes at both ends so you'll be able to put it back as it was.  Take the driveshaft to your local driveline shop. They'll mount it up, spin it and check the balance, usually while you wait.
5S071, 6S1467

trotrof1

Check wheel balance first. Best way to see any runnout problems is to get it on a lift and have someone run the car at speed of issue . Any wheel, tire, or driveshaft issues will be evident at that point . Dont overlook the motor and trans mounts.

deathsled

#7
Wow all great suggestions gentlemen. I will get her in when everything clears and we're back up and running again. I need new tires anyway. Mine are going on 8 years old. Old is never good when it comes to tires even if there is little tread wear. I will inflate the tires to 50 psi first and see. That's an easy one to try.
"Low she sits on five spoke wheels
Small block eight so live she feels
There she's parked beside the curb
Engine revving to disturb
She's the princess from his past
Red paint gold stripes damned she's fast"

GT350DAVE

Go with a road force balance. It will tell you everything you need to know about the tires.
Dave
Support the SAAC Registry

corbins

Quote from: GT350DAVE on April 08, 2020, 02:55:45 PM
Go with a road force balance. It will tell you everything you need to know about the tires.
Dave
Dave , never heard this term, can you explain? How is this done?
Thanks

GT350DAVE

A Road Force Balancing machine is a machine that does just that. It is designed to balance the tire while duplicating the force the tire would see while on the car. We have several shops in our area that have these machines. I know not every shop has one because they aren't cheap.
Dave
Support the SAAC Registry


mikeh

All GM dealers are required to have a Hunter Road Force Elite due to truck vibration problems. Here is some info plus a locator to find a tire store near you that has one:
https://www.hunter.com/wheel-balancers/road-force-elite

It is not only is a balancer but a diagnostic tool that analyzes & identifies the problem in a wheel & tire assembly.
And yes I am a Hunter sales rep lol, but I personally saw the difference it makes over standard balancing long before I became a rep!

2112

Quote from: mikeh on April 09, 2020, 07:25:20 PM
All GM dealers are required to have a Hunter Road Force Elite due to truck vibration problems. Here is some info plus a locator to find a tire store near you that has one:
https://www.hunter.com/wheel-balancers/road-force-elite

It is not only is a balancer but a diagnostic tool that analyzes & identifies the problem in a wheel & tire assembly.
And yes I am a Hunter sales rep lol, but I personally saw the difference it makes over standard balancing long before I became a rep!

They are awesome. My 37 x 13.50 Truck tires get this every set. Sure helps when it detects a heavy spot or out of round tire so you can reject it on the spot without logging any miles on it.

NC TRACKRAT

The Hunter Road Force Balancer has saved me a lot of frustration and money over the years.  We have 993 Porsches and they're very sensitive to imbalance.  The Hunter equipment can diagnose tire and wheel problems and give the operator instructions to correct them if at all possible.  Sometimes, it's just a matter of rotating the tire on the wheel to achieve better balance.
5S071, 6S1467