Author Topic: 1966 GT-350 exhaust system request for pics  (Read 3360 times)

rraceme

  • Full Member
  • ***
    • View Profile
1966 GT-350 exhaust system request for pics
« on: May 12, 2020, 01:00:36 PM »
Good morning. I've been looking for good pictures online of a correct factory replacement exhaust systems and not been successful. Not to buy but to see properly installed. Could be I'm not looking in the correct places? Also I used the search engine in this forum and not found photos.

I've always found the members of this SAAC forum be incredibly resourceful.

Be great if someone would post 3 pictures of an installed exhaust system from exit of tri-y headers to the rear where resonators exit w\turn downs at rear. It could be an original system or reproduction system which simulates the factory system. Or if someone has a great web site I could visit - Thanks Fred
« Last Edit: May 12, 2020, 01:02:33 PM by rraceme »
SFM 6S2227

Coralsnake

  • SAAC Member
  • Hero Member
  • *
  • The original Influencer
    • View Profile
    • theCoralsnake.com
Re: 1966 GT-350 exhaust system request for pics
« Reply #1 on: May 12, 2020, 01:17:57 PM »
« Last Edit: May 12, 2020, 01:29:17 PM by Coralsnake »

GT350Lad

  • SAAC Member
  • Hero Member
  • *
  • Trent
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #2 on: May 12, 2020, 04:20:12 PM »
It is a thing of beauty that exhaust
6S373
6S1276

gt350hr

  • Hero Member
  • *****
  • Randy Gillis in real life - 5353 original posts
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #3 on: May 12, 2020, 05:22:44 PM »
    As good as it gets!
Celebrating 46 years of drag racing 6S477 and no end in sight.

rraceme

  • Full Member
  • ***
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #4 on: May 12, 2020, 06:08:08 PM »
Thank you all. I've previously reviewed Scott fuller site. It displays an uninstalled system and has a few pictures of low resolution. It also does not display an H pipe. I'm hoping someone would post installed pictures of an original system or aftermarket.

Thanks Fred
SFM 6S2227

Coralsnake

  • SAAC Member
  • Hero Member
  • *
  • The original Influencer
    • View Profile
    • theCoralsnake.com

gt350hr

  • Hero Member
  • *****
  • Randy Gillis in real life - 5353 original posts
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #6 on: May 12, 2020, 06:30:35 PM »
    Scott also had my NOS ( from '72) GT350 H pipe and makes exact duplicates.
Celebrating 46 years of drag racing 6S477 and no end in sight.

rraceme

  • Full Member
  • ***
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #7 on: May 12, 2020, 08:20:43 PM »
No doubt scott fuller is the Cadillac of exhaust. ( sorry to use a GM reference) still hoping to see installed pictures of a 1966 GT350 w\Tri-Y exhaust all the way back.  Thanks, Fred
SFM 6S2227

kingchief

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #8 on: May 12, 2020, 08:21:10 PM »
Here are a couple of photos...enjoy! A couple were of a Scott Fuller system. The best.

Steve
SFM 6S406

kingchief

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #9 on: May 12, 2020, 08:27:01 PM »
Another couple for your viewing enjoyment.

Steve
SFM 6S406

GT350Lad

  • SAAC Member
  • Hero Member
  • *
  • Trent
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #10 on: May 13, 2020, 03:56:04 AM »
Another couple for your viewing enjoyment.

Steve

Looks like Brant’s 66 carryover, Damm nice
6S373
6S1276

Scott Fuller

  • Jr. Member
  • **
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #11 on: May 13, 2020, 09:41:51 AM »
https://www.scottfullerreproductions.com/1966-shelby-exhaust.html

I believe this has the wrong clamp on the balance tube on the H-pipe.  Rest is correct.

These photos and others are in the "Reference Information" section on my website.

Scott Fuller
« Last Edit: May 13, 2020, 09:44:11 AM by Scott Fuller »

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #12 on: May 13, 2020, 10:48:05 AM »
Can't get much better. As Scott mentioned the clamp on the equalizer tube is supposed to be different. Originally a generic locally sourced auto parts store type horse shoe exhaust clamp was used for that one spot back in the day instead of the Ford saddle clamp used on the rest of the system when it was installed at Ford. With enough patience the same style generic clamp(specific style) can still be found today.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

rraceme

  • Full Member
  • ***
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #13 on: May 13, 2020, 04:32:58 PM »
Thank you all. This is exactly what I was wanting to review- TY,Fred
SFM 6S2227

Tinface

  • Jr. Member
  • **
  • Only an intellectual could say something so stupid
    • View Profile
Re: 1966 GT-350 exhaust system request for pics
« Reply #14 on: May 22, 2020, 06:34:17 PM »
What’s the cost on thIs system without shipping?