Author Topic: Continueing education on 66 GT350H Chrome Magnum 500's  (Read 1577 times)

6s1640

  • Hero Member
  • *****
    • View Profile
Continueing education on 66 GT350H Chrome Magnum 500's
« on: June 19, 2020, 03:16:23 PM »
Hi all,

You should all be aware of the Chrysler Magnum 500 with the marking 14X 6 JK 795C with the near 4 inch back spacing.  Well, Motor Wheels sales department did very well back in the day.  GM also has a chrome Magnum 500 with the same hoop and markings.  So don't be confused if you come across one of these wheels.  The bolt pattern will not fit on your GT350.  Below is the link to the auction, plus some images for the record.  Hope this helps anyone looking for these wheels.

Remember, the 66 GT350H chrome Magnum 500 wheel has to have a very near 3.375 back spacing, markings 14 X 6 JK, 795C and Ford bolt pattern to be correct.

Take care

Cory


https://www.ebay.com/itm/303409583812?_trksid=p2334524.m570.l5999&_trkparms=gh1g%3DI303409583812.N36.S2.typeWATCH_ITEM_ENDING_SOON.R4.TR8
« Last Edit: June 19, 2020, 03:19:32 PM by 6s1640 »

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: Continueing education on 66 GT350H Chrome Magnum 500's
« Reply #1 on: June 19, 2020, 03:26:25 PM »
Thanks,I appreciate the posting.  :)
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Continueing education on 66 GT350H Chrome Magnum 500's
« Reply #2 on: June 19, 2020, 03:50:47 PM »
Thanks Cory - Hopefully this will help someone make an educated decision
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

JBinAlabama

  • Jr. Member
  • **
  • I found a GT350 to drive!
    • View Profile
Re: Continueing education on 66 GT350H Chrome Magnum 500's
« Reply #3 on: July 23, 2021, 01:56:22 PM »
Great info, please tell me where on the wheel the markings are located?
Thank you

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Continueing education on 66 GT350H Chrome Magnum 500's
« Reply #4 on: July 23, 2021, 04:13:40 PM »
Great info, please tell me where on the wheel the markings are located?
Thank you

In the pictures Cory posted in the first post the stampings were made in the outer rim of the wheel between the beads and from the tire side so the tire needs to be removed to see them
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge