Author Topic: Fuel Line Clamps  (Read 1432 times)

6T6/7

  • SAAC Member
  • Jr. Member
  • *
    • View Profile
Fuel Line Clamps
« on: July 08, 2020, 08:30:05 PM »
This may have already been discussed before, but I wasn't able to find it... For a 66 with 715 Holley, what are the correct clamps for the hose between hard line and fuel filter, crimp style or the three-prong spring clamp?  I think I've seen both types used.
‘66 6S379, ‘67 GT350 #1661

GT350Lad

  • SAAC Member
  • Hero Member
  • *
  • Trent
    • View Profile
Re: Fuel Line Clamps
« Reply #1 on: July 08, 2020, 08:51:10 PM »
Hi, I am pretty close to you in number and I am crimp style.I’ll try post a pic of the hard line to rubber one

Cheers
« Last Edit: July 09, 2020, 01:18:15 AM by GT350Lad »
6S373
6S1276

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: Fuel Line Clamps
« Reply #2 on: July 08, 2020, 09:39:38 PM »
This may have already been discussed before, but I wasn't able to find it... For a 66 with 715 Holley, what are the correct clamps for the hose between hard line and fuel filter, crimp style or the three-prong spring clamp?  I think I've seen both types used.
Actually there is evidence to support that both were used but with that said you would get less questioning with the crimp style for a 66 GT350 because it was the most common IMO.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

6T6/7

  • SAAC Member
  • Jr. Member
  • *
    • View Profile
Re: Fuel Line Clamps
« Reply #3 on: July 08, 2020, 10:40:03 PM »
Ok, thanks much, sounds good enough for me.
‘66 6S379, ‘67 GT350 #1661

kingchief

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: Fuel Line Clamps
« Reply #4 on: July 09, 2020, 08:44:49 AM »
Me too...pretty close in number and I have crimp style [see photo].

All the best,

Steve
SFM 6S406

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Fuel Line Clamps
« Reply #5 on: July 09, 2020, 10:45:22 AM »
Me too...pretty close in number and I have crimp style [see photo].

All the best,

Steve

Wow. That’s a very nice and clean engine bay, Steve. Well done!
Nothing beats a classic!