Author Topic: Shelby GT350R Restomod  (Read 25799 times)

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Shelby GT350R Restomod
« on: March 23, 2018, 02:12:28 PM »
So, I won't try to repost all the build pictures from the old site.  However, I will repost some of the more significant pics, as this car nears the finish line (pun intended).

Here is how I purchased the car:
Nothing beats a classic!

2112

  • SAAC Member
  • Hero Member
  • *
  • Fox Island, WA
    • View Profile
Re: Shelby GT350R Restomod
« Reply #1 on: March 23, 2018, 02:59:08 PM »
Incredible  8)

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #2 on: March 23, 2018, 10:52:24 PM »
Thanks! More to come.
Nothing beats a classic!

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #3 on: March 24, 2018, 10:45:17 AM »
More with the initial prep.  Again, this car started it's life as a true 1966 K-code, and it was missing its entire drive train when I bought it.  However, it was completely painted and it had an entire roll cage installed, plexiglass side windows and other odds and ends.
Nothing beats a classic!

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #4 on: March 24, 2018, 10:46:35 AM »
Started with a modern 6-speed tranny and a Dart aluminum small block with Dart aluminum heads. 

This pic with the tranny shows the mock up block, hence the "non-aluminum" look.  ;D
Nothing beats a classic!

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #5 on: March 24, 2018, 10:49:56 AM »
Given the need for wider rear tires, the car was mini-tubed.  And, the interior frame rails had to be modified as well.
Nothing beats a classic!

KR Convertible

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #6 on: March 24, 2018, 10:53:15 AM »
How much work had to be done on the trans tunnel to get the T56 in?   Did you lower the engine too?   Thanks

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #7 on: March 24, 2018, 10:54:21 AM »
Here's a shot of the the rear rims and tires during test fit.

Also, here is the Strange rear end, and finally shots of the rear end installed with the rear wheels and tires.

Also, the ride setup will be all Total Control Suspension with coil overs all around.
Nothing beats a classic!

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #8 on: March 24, 2018, 10:59:06 AM »
How much work had to be done on the trans tunnel to get the T56 in?   Did you lower the engine too?   Thanks

There wasn't too much work that had to be done to the trans tunnel, but there was definitely some cutting.  However, when the trans tunnel is finished, the tunnel will look different, as it will have more of a 1-piece look to make it present as more finished versus cut up.

And, yes - the engine had to be lowered.  In fact, you'll see in later pictures that I ended up going with a custom hood that gives 33% more height clearance via the hood scoop; which was also needed given the height of the engine when finished.
Nothing beats a classic!

KR Convertible

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #9 on: March 24, 2018, 11:45:42 AM »
Very cool build.  It's a shame we lost the previous thread.  I've enjoyed watching the progress.  Good luck!

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #10 on: March 24, 2018, 11:57:08 AM »
Very cool build.  It's a shame we lost the previous thread.  I've enjoyed watching the progress.  Good luck!

Thanks! I really appreciate it.
Nothing beats a classic!

Richstang

  • Hero Member
  • *****
    • View Profile
    • 1967 Shelby Research Group
Re: Shelby GT350R Restomod
« Reply #11 on: March 24, 2018, 12:13:36 PM »
It looks great indoors. I can't wait to see it out in the daylight.
1967 Shelby Research Group 

www.1967ShelbyResearch.com
www.facebook.com/groups/1967shelbyresearch

1991-1993 SAAC MKI, MKII, & Snake Registrar

mark p

  • SAAC Member
  • Hero Member
  • *
  • south NJ - Philly 'burbs
    • View Profile
Re: Shelby GT350R Restomod
« Reply #12 on: March 24, 2018, 12:35:34 PM »
Very cool build.  It's a shame we lost the previous thread.  I've enjoyed watching the progress.  Good luck!

+1
I think there may still be some drool residue on my keyboard from watching the "old thread"  ::)
"I don't know what the world may need, but a V8 engine's a good start for me" (from Teen Angst by the band "Cracker")

66 Tiger / 65 Thunderbird

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #13 on: March 24, 2018, 08:22:02 PM »
Custom headers and custom exhaust...with side exits, of course.   ;D
Nothing beats a classic!

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby GT350R Restomod
« Reply #14 on: March 24, 2018, 08:24:03 PM »
Test fit of the tranny; which will allows for the headers to be removed without removing the engine.

Also, here's a shot of the radiator.  You can never have too much cooling!  8)
Nothing beats a classic!