Eastwood's Cad Electroplating kit.

[2112]

https://www.eastwood.com/ew-electroplating-system-tin-zinc.html

Anybody use this? Just wondering what the results are like. Only thinking of small parts etc.

[Royce Peterson]

I've used a similar kit to cad plate hardware that was removed during aircraft inspections. The hardware got inspected by ultrasound, magnuflux or zyglo, then we would polish and re - plate before re - installing.

As the Eastwood site says the parts need to be prepared for best results. You will need to polish parts to get the best results.