News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

paxton equiped 67 gt350s hood

Started by cbrown, January 31, 2021, 02:39:35 PM

Previous topic - Next topic

cbrown

Where any modifications done to the hood on paxton equiped 67 gt350s?

chris

Sixx7shelby

67 GT350 #1482
69 Eliminator 428SCJ
97 Cobra
86 SVO



Bob Gaines

Quote from: cbrown on January 31, 2021, 02:39:35 PM
Where any modifications done to the hood on paxton equiped 67 gt350s?

chris
You already got your answer which I agree with BTW but I am curious why the ask ? You typically don't ask random questions without a back story.  Wondering if there is some sort of urban legend that someone had told you about. Just curious.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

cbrown

Bob,  I have Chris Laytons car at my shop undergoing restoration and it is an early steel framed hood car but has cut out on left side as if needing clearance for paxton.

chris

Bob Gaines

Quote from: cbrown on January 31, 2021, 06:33:28 PM
Bob,  I have Chris Laytons car at my shop undergoing restoration and it is an early steel framed hood car but has cut out on left side as if needing clearance for paxton.

chris
Before making a call I would first be sure that the 67 unique motor mounts are in place. Another year motor mounts and or generic replacements may have caused a unexplained clearance problem in the past and a notch in the innerstructure may have been done to solve the problem . With correct 67 motor mounts in place I would use some clay at the area on the blower that corresponds with the notch to determine clearance with the hood closed. After removing the pins you could probably use a all steel hood with intact innerstructure for the clearance testing process .
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

jcarmain01@comcast.net

I have a 1967 GT 350  #1933 with a vintage SN 60 Paxton. If the  Paxton is clocked correctly, there should be no problem with clearence issues
Jim Carmain.   PS Whatever Bob Gaines tells you, you can take to the Bank. His knowledge is immense!!

Bob Gaines

Quote from: jcarmain01@comcast.net on January 31, 2021, 07:55:51 PM
I have a 1967 GT 350  #1933 with a vintage SN 60 Paxton. If the  Paxton is clocked correctly, there should be no problem with clearence issues
Jim Carmain.   PS Whatever Bob Gaines tells you, you can take to the Bank. His knowledge is immense!!
I'm blushing Jim. Thanks for the compliment.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby