Author Topic: '65-67 Shelby/HiPo Engine Parts - UPDATED Again  (Read 3408 times)

marvs289

  • Jr. Member
  • **
    • View Profile
'65-67 Shelby/HiPo Engine Parts - UPDATED Again
« on: April 04, 2018, 04:42:18 PM »
o Used Fans, A67, $600,  G4, $700
o Motorcraft Distributors, $350
o Rebuilt Original S2MS Carburetor, 755, $1250
o Timing Covers, $125
o NOS Intake Valves, $20/each, Exhaust Valves, $25/each
o NOS Valve Springs (6), $25/each
o NOS Rocker Arms with Fulcrums, $275
o NOS Valve Spring Retainers, $250
o NOS Early FoMoCo PCV Valve, THREADED, $80
o Used K-H Disc Brake Porportioning Valve, $150
o NOS BF-601 Spark Plugs, box of 10, $100

o Original ‘65-66 Firewall Heater Delete Plate, $75  Last one
o Original C5AF-10A352-H Alternator Pulley, $125

o RARE '67 TE Heads Set Castings, Tested, $1900
o RARE '67 Rebuilt Set Non-TE Heads, 6M8, $2400

o NOS S1MS Sway Bar, $250
o 66 W-MO, 10 65, Radiator Top Tank Only, $300
(Missing C4ZE G2 Tag- can be purchased)
o Early 289 Open Letters Cobra Valve Covers, $425SOLD
o Early 289 Cobra Street Oil Pan, $700 SOLD
o Used Block 3M30, $1200 SOLD
o Heads- 3H15 Set Castings,Tested, $1900
o C3 (1) Casting 4A14, $1000
o C8 Set Heads Non-TE 9K23, $1500
o C5 Distributors, Used $500, Rebuilt $625
o NOS Early C3 Timing Set, $425
(includes NOS Cam Gear, NOS Timing Chain, used Crank Gear, used Counterweight, AND Thrust Plate)
o NOS Later C5 Timing Set, $325
(includes NOS Cam Gear, NOS Timing Chain, used Crank Gear, used Counterweight)
o Aluminum Water Pumps, $400
o RARE Reman ‘65 Cast Iron Water Pumps, C5OE-B Repro Impeller $425
o Reman ‘66-67 Cast Iron Water Pumps, C6OE-A Repro Impeller $325
o NOS Autolite Bypass Hose, $40  only 2 left
o NOS Autolite NO Star Spark Plugs, BF-32, BF-42 $60 set
o NOS Piston Pins $80
o Used C5AE-A Crank Pulley, $40
o Used Rods, $500
o Used Rods with Used Std Pistons, $700
o NOS Boss 302 Rods, not numbered, $900
o NOS Std Pistons, $600
o Used Std Pistons, $400
o New Set Sealed Power 4.030" Pistons, $400
o NOS Oil Pump with Pickup, $150
o NOS HiPo/427 Autolite Dual Point Tune-Up Kit $150
(Includes (8) NO Star BF-32 Plugs, (2) DP-5 Points, (1) DC-5 Condenser)
o NOS Gaskets, Head $100
o NOS Set Rocker Arms with Fulcrums, $275
o NOS Set Push Rods, $80

Prices do not include shipping. I will combine shipping in the case of multiple purchases. Pictures upon request. Thank you
« Last Edit: May 15, 2018, 11:29:38 AM by marvs289 »

bhoulis

  • Jr. Member
  • **
    • View Profile
Re: '65-67 Shelby Engine Parts - UPDATED
« Reply #1 on: April 08, 2018, 08:06:11 PM »
Location? Thanks.

marvs289

  • Jr. Member
  • **
    • View Profile
Re: '65-67 Shelby Engine Parts - UPDATED
« Reply #2 on: April 09, 2018, 03:42:34 PM »
Virginia

FordGT

  • Jr. Member
  • **
    • View Profile
Re: '65-67 Shelby/HiPo Engine Parts - UPDATED
« Reply #3 on: April 11, 2018, 07:42:29 PM »
What's the Ford stamped part number on the 67' fan?

Thanks

marvs289

  • Jr. Member
  • **
    • View Profile
Re: '65-67 Shelby/HiPo Engine Parts - UPDATED
« Reply #4 on: April 13, 2018, 01:58:33 PM »
Sorry for the delay, pretty busy. 911960. It’s a service replacement for 63-66 HiPo Fan. If you have a 67, you need a C6OE-D, standard 4 bladed fan. Thanks

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: '65-67 Shelby/HiPo Engine Parts - UPDATED
« Reply #5 on: April 13, 2018, 02:32:07 PM »
Sorry for the delay, pretty busy. 911960. It’s a service replacement for 63-66 HiPo Fan. If you have a 67, you need a C6OE-D, standard 4 bladed fan. Thanks
Correction C6AE-E marked for 67 hipo at least what came on 67 GT350.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby