News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

wire harness for oil light question

Started by DRGT350, February 26, 2021, 05:31:48 PM

Previous topic - Next topic

DRGT350

I replaced the under hood harness on my 65 - obviously the oil light is no longer hooked up as the oil pressure gage line takes it's place. And I don't have a picture from prior to taking everything apart...

What was done at SA with this now "extra" wire when they installed the oil pressure line?

thanks in advance for your help !

Dave

Bob Gaines

Quote from: DRGT350 on February 26, 2021, 05:31:48 PM
I replaced the under hood harness on my 65 - obviously the oil light is no longer hooked up as the oil pressure gage line takes it's place. And I don't have a picture from prior to taking everything apart...

What was done at SA with this now "extra" wire when they installed the oil pressure line?

thanks in advance for your help !

Dave
Typically sniped it off where it exits the wrap of the engine gauge feed harness.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

mygt350

Thought the terminal was snipped and wire folded back and taped up around the transition from vertical to horizontal at front top of engine?
Continuous caretaker of 5S228 since May 1967

Bob Gaines

Quote from: mygt350 on February 26, 2021, 05:43:10 PM
Thought the terminal was snipped and wire folded back and taped up around the transition from vertical to horizontal at front top of engine?
Maybe more then one way. Just what I have seen. The simple snip was also what was done in 67 when a mechanical gauge was substituted. 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby