Author Topic: 67 shelby rear end cap screws  (Read 1837 times)

cbrown

  • Full Member
  • ***
    • View Profile
67 shelby rear end cap screws
« on: March 14, 2021, 04:39:38 PM »
Are all rear end caps supposed to have 3  philips head screws in the lower portion attaching to 1/4 panel?   

chris

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: 67 shelby rear end cap screws
« Reply #1 on: March 14, 2021, 05:46:09 PM »
Are all rear end caps supposed to have 3  philips head screws in the lower portion attaching to 1/4 panel?   

chris
It depends on when the car was converted. Some early cars have less.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

cbrown

  • Full Member
  • ***
    • View Profile
Re: 67 shelby rear end cap screws
« Reply #2 on: March 14, 2021, 06:03:03 PM »
So what about a january  built car?  656 


chris 

George Schalk

  • Full Member
  • ***
    • View Profile
Re: 67 shelby rear end cap screws
« Reply #3 on: March 14, 2021, 10:11:29 PM »
Hi Chris, if it helps any, my #772 car with a February completion has 1 phillips head screw per side and they are mounted toward the bottom of the cap right above the lower valance.  The later cars I have 1665, 2310, and 2585 all have 3 Phillips screws per side.

Maybe others will chime in with what their earlier cars may have.

George
« Last Edit: March 15, 2021, 05:07:02 PM by George Schalk »

JD

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: 67 shelby rear end cap screws
« Reply #4 on: March 14, 2021, 10:17:56 PM »
I'd go with one for a January SA completion car.

here's examples ...
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

cbrown

  • Full Member
  • ***
    • View Profile
Re: 67 shelby rear end cap screws
« Reply #5 on: March 15, 2021, 08:47:08 AM »
thank you all very much!!

chris

557

  • Hero Member
  • *****
  • 1967 gt500 since 82 NFS!
    • View Profile
Re: 67 shelby rear end cap screws
« Reply #6 on: March 15, 2021, 11:41:29 AM »
Only 1 on#557.