We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ
I'm helping a friend reassemble a 69 FB . It was purchased painted and rolling with a bunch of boxes of parts. I see a hole in each outer wheelhouse .... brake cooling ducts?
Also found 2 pieces - fiberglass with similar holes in them ... related to above ?
One more... wat type of rivets for vin tag on dash and Shelby plate on apron .. steel ?
Jeff, AJ, thanks very much !! Very helpful. Now I'm trying to figure out the front fender rear splash shields. I dont see any mounting holes at firewall pinchweld where one would normally see the three holes for the mounting screws ??
Quote from: corbins on April 26, 2021, 09:04:13 PMJeff, AJ, thanks very much !! Very helpful. Now I'm trying to figure out the front fender rear splash shields. I dont see any mounting holes at firewall pinchweld where one would normally see the three holes for the mounting screws ??Don't know what has been done or replaced on your particular car. Originally the two facing inward were often covered (the hole and threads) when looking at the area from the outside of the car with the shields removed. But sure you have looked up and down and on both sides already