SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.
Are there any markings on an original 9 inch ,28 spline ,vent hose clamp on a 70 Shelby gt350.have my original and can't see any...just want to confirm,thx keith
Which clamp are you talking about? The crimp clamp at the housing vent nipple or the rubber coated clamp that holds the vent hose to the body? I typically see a yellow mark on the hose under the rubber coated clamp.
Quote from: 430dragpack on September 12, 2021, 01:11:04 PMWhich clamp are you talking about? The crimp clamp at the housing vent nipple or the rubber coated clamp that holds the vent hose to the body? I typically see a yellow mark on the hose under the rubber coated clamp.Bob G is referring to the clamp that holds the hose to the uni-body above where the rear end housing is attached
Sorry about the confusion,I was speaking about the crimped clamp at nipple on axle housing...yes my hose has a yellow mark on it....my bad...thx keith
Bob ,was speaking if pinch clamp has any stampings ,as mine did not,but my fuel line ones at carburetor did. Thx keith