Author Topic: 65 rear axle bump stop relocation bracket.  (Read 1182 times)

Bossbob123

  • Newbie
  • *
    • View Profile
65 rear axle bump stop relocation bracket.
« on: January 23, 2022, 11:37:54 AM »
Hi guys,  Im looking to purchase a pair of 65 rear axle bump stop relocation brackets.

Thank You

Bob B

GT350Lad

  • SAAC Member
  • Hero Member
  • *
  • Trent
    • View Profile
Re: 65 rear axle bump stop relocation bracket.
« Reply #1 on: January 23, 2022, 02:46:58 PM »
Shelby parts and restorations may have them

Cheers
6S373
6S1276

Bossbob123

  • Newbie
  • *
    • View Profile
Re: 65 rear axle bump stop relocation bracket.
« Reply #2 on: January 23, 2022, 04:21:18 PM »
Thank you.  I tried there, but communications were tough.  Now sold out.

Bob B

gt350bp

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: 65 rear axle bump stop relocation bracket.
« Reply #3 on: January 23, 2022, 07:27:43 PM »
I might still have the cardboard template I used to have a local fabricator make mine. I'll check tomorrow.

Don
gt350bp

Bossbob123

  • Newbie
  • *
    • View Profile
Re: 65 rear axle bump stop relocation bracket.
« Reply #4 on: January 23, 2022, 08:44:07 PM »
Thank you.

Bob B.

gt350bp

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: 65 rear axle bump stop relocation bracket.
« Reply #5 on: January 24, 2022, 09:44:52 AM »
Bob,

Found my template.

Send me your address to gt350bp@bellsouth.net and I'll send a copy in the mail. I made my brackets out of 1/8" steel, but not sure if that is the proper thickness. I think, I had taken the measurements off a 65 that was being restored in the same shop in Pennsylvania that was doing the paint and body work as my replica.

Don
gt350bp
« Last Edit: January 25, 2022, 08:11:09 AM by gt350bp »

gt350bp

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: 65 rear axle bump stop relocation bracket.
« Reply #6 on: January 24, 2022, 10:05:31 AM »
Attached is photo of the brackets I made for my GT 350 Competition replica. They are fabricated from 3 pieces of 1/8" steel and welded.

Don
gt350bp