News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

Can buffing Rouge go bad?

Started by hurlbird, March 17, 2022, 06:34:14 AM

Previous topic - Next topic

hurlbird

Doing my stainless 68 hubcaps.. Haven't used the rouge in many years. Started with black and sisal wheel then went to green. The very fine scratches remain i cannot get a mirror finish. I wonder if the rouge lost moisture??? that a possibility? 

KDunne

Over time yes i think it can dry out if not sealed. 

98SVT - was 06GT

I've used some 40+ year old stuff my dad had and it was good. You need to get rid of the scratches by sanding first - end up with 1200 grit. Use a sanding block not your fingers.
Previous owner 6S843 - GT350H & 68 GT500 Convert #135.
Mine: GT1 Mustang Track Toy, 1998 SVT Cobra, Wife's: 2004 Tbird
Member since 1975 - priceless

557

Quote from: 98SVT - was 06GT on March 17, 2022, 12:45:50 PM
I've used some 40+ year old stuff my dad had and it was good. You need to get rid of the scratches by sanding first - end up with 1200 grit. Use a sanding block not your fingers.
.     Wet or dry sand?

KR Convertible

A cloth wheel will work better for fine scratches.

98SVT - was 06GT

Previous owner 6S843 - GT350H & 68 GT500 Convert #135.
Mine: GT1 Mustang Track Toy, 1998 SVT Cobra, Wife's: 2004 Tbird
Member since 1975 - priceless

hurlbird

thanks for the feedback. The scratches im talking about i believe are the result of the sisal wheel so they are slight/faint nothing to sand, but i cannot remove them with white or green. I ordered a gray from eastwood maybe that will do it.

CSX 4133

Being these are light defects it might be time for a fine cut (low grit) polish by hand.
Be sure to polish in the direction of the milling of the item with a cotton towel.