Author Topic: Restoring GT350 Emblem  (Read 3284 times)

GT350Lad

  • SAAC Member
  • Hero Member
  • *
  • Trent
    • View Profile
Restoring GT350 Emblem
« on: April 11, 2022, 12:16:13 AM »
Hi guys, I love using the cars original parts so asking if anyone has had success or tips restoring there original GT350 tail light panel emblem?

Or just use it as is with all its Patina?

Here are some pics of 6S1276 original emblem

Cheers
« Last Edit: April 11, 2022, 04:08:54 PM by GT350Lad »
6S373
6S1276

GT350Lad

  • SAAC Member
  • Hero Member
  • *
  • Trent
    • View Profile
Re: Restoring GT350 Emblem
« Reply #1 on: April 11, 2022, 04:07:06 PM »
Pic of back for interest

Looks original but heavy patina
6S373
6S1276

deathsled

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Restoring GT350 Emblem
« Reply #2 on: April 11, 2022, 04:26:13 PM »
I'd keep the patina.
"Low she sits on five spoke wheels
Small block eight so live she feels
There she's parked beside the curb
Engine revving to disturb
She's the princess from his past
Red paint gold stripes damned she's fast"

jk66gt350

  • Sr. Member
  • ****
    • View Profile
Re: Restoring GT350 Emblem
« Reply #3 on: April 11, 2022, 04:35:59 PM »
I restored mine many years ago - used a sanding block with very fine sandpaper to restore the finish and then used a small artist brush with flat black model paint to paint the inside of the letters / numbers.  Looked like new again.

greekz

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Restoring GT350 Emblem
« Reply #4 on: April 11, 2022, 04:54:25 PM »
I restored mine many years ago - used a sanding block with very fine sandpaper to restore the finish and then used a small artist brush with flat black model paint to paint the inside of the letters / numbers.  Looked like new again.

That is what I did as well.  Very easy and well worth the effort.
SFM 6S1134  '67 GT-350 #2339

GT350Lad

  • SAAC Member
  • Hero Member
  • *
  • Trent
    • View Profile
Re: Restoring GT350 Emblem
« Reply #5 on: April 11, 2022, 04:59:10 PM »
Thanks guys, both good ways. I am honestly liking the patina but Curious as to how well the fine grit sandpaper worked? Any pics before and after? I am keen to try
I think it touch up the black for sure. Just a standard flat black?

Cheers
6S373
6S1276

jk66gt350

  • Sr. Member
  • ****
    • View Profile
Re: Restoring GT350 Emblem
« Reply #6 on: April 11, 2022, 06:23:55 PM »
Standard flat black.  I think I used 220 grit, but not sure.  No pictures of the before and after but it does come up like new.  Just use fine grit, take your time and only sand back and forth lengthwise.   

6s2055

  • Full Member
  • ***
    • View Profile
Re: Restoring GT350 Emblem
« Reply #7 on: April 11, 2022, 06:51:16 PM »
Instead of sandpaper, perhaps 000 or 0000 steel wool?

jk66gt350

  • Sr. Member
  • ****
    • View Profile
Re: Restoring GT350 Emblem
« Reply #8 on: April 11, 2022, 07:49:17 PM »
Steel wool gets stuck in the letters / numbers, cannot be used so you get consistent pressure on the full surface and is not aggressive enough to clean up the years of grime etc.  Its aluminum.  You can't hurt it if you use fine sandpaper, a sanding block and go easy.

Steve McDonald Formally known as Mcdonas

  • SAAC Member
  • Hero Member
  • *
  • “Drive it like you stole it”
    • View Profile
Re: Restoring GT350 Emblem
« Reply #9 on: April 11, 2022, 09:06:44 PM »
Before and after
Owned since 1971, now driven over 245,000 miles, makes me smile every time I drive it and it makes me feel 21 again.😎

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: Restoring GT350 Emblem
« Reply #10 on: April 11, 2022, 10:06:07 PM »
I suppose it also depends on your expectations. Some emblems are too far gone to bring back to show quality but may be good enough for a fun driver .
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

GT350Lad

  • SAAC Member
  • Hero Member
  • *
  • Trent
    • View Profile
Re: Restoring GT350 Emblem
« Reply #11 on: April 11, 2022, 11:08:06 PM »
Thanks Guy for all the replies. Much appreciated

Cheers
6S373
6S1276

pbf777

  • Hero Member
  • *****
    • View Profile
Re: Restoring GT350 Emblem
« Reply #12 on: April 12, 2022, 11:22:42 AM »
     I would use a flat 'honing' or 'sharpening stone' for at least the initial surface reduction, stepping to finer grits, utilizing sandpaper, on a hard backing, only as the final process, if required, to acquire the finish desired.  The reasoning for this is that the stone will permit a faster and more even sum of stock removal this resulting in a more level surface and sharper, squarer edge definitions.   :)

     As this generally presenting more like a machine manufacturing execution rather than a hand one.    :o

     Scott.

GT350Lad

  • SAAC Member
  • Hero Member
  • *
  • Trent
    • View Profile
Re: Restoring GT350 Emblem
« Reply #13 on: April 12, 2022, 03:48:48 PM »
Ok great tips thanks Scott
6S373
6S1276

98SVT - was 06GT

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Restoring GT350 Emblem
« Reply #14 on: April 12, 2022, 04:52:50 PM »
Put a sheet of wet/dry sandpaper on flat surface and sand straight in one direction. Keep flushed with clean water. If the pits are deep you can start with a coarse paper and work up to finer to get the original finish.
You can use a sanding block but it's easier to move the emblem on the sand paper. If you use steel wool or sandpaper without a block you risk rounding off the edges of the emblem/lettering and ending up with a wavy surface. Also the steel wool will leave little specks of steel embedded in the surface and they will rust. Sharpening stones are much finer than sandpaper and will not remove much material. They will need to have an ample amount of oil used to keep the soft material from clogging them and causing gouges in your surface.
« Last Edit: April 12, 2022, 04:56:58 PM by 98SVT - was 06GT »
Previous owner 6S843 - GT350H & 68 GT500 Convert #135.
Mine: GT1 Mustang Track Toy, 1998 SVT Cobra, Wife's: 2004 Tbird
Member since 1975 - priceless