Author Topic: Trunk taillight protective boards Identification  (Read 1237 times)

WT6066-2600

  • Full Member
  • ***
    • View Profile
Trunk taillight protective boards Identification
« on: April 30, 2022, 07:38:18 PM »
Today's garage discovery,

Found these boards back in the 80s and stored them away.  Never knew if they might be original to 68 Shelbys.

One side is a flat black paper texture and the other side is a gray-blue somewhat smoother texture.  Also the shapes are different, one is longer and the notches at the top are spaced differently.   

Coralsnake

  • SAAC Member
  • Hero Member
  • *
  • The original Influencer
    • View Profile
    • theCoralsnake.com
Re: Trunk taillight protective boards Identification
« Reply #1 on: April 30, 2022, 09:37:55 PM »
Yes sounds like a proper description

TLea

  • Hero Member
  • *****
    • View Profile
Re: Trunk taillight protective boards Identification
« Reply #2 on: May 01, 2022, 02:12:56 PM »
Do they have a makers mark stamped into them in one of the upper corners?

WT6066-2600

  • Full Member
  • ***
    • View Profile
Re: Trunk taillight protective boards Identification
« Reply #3 on: May 01, 2022, 02:48:34 PM »
No stamped markings

TLea

  • Hero Member
  • *****
    • View Profile
Re: Trunk taillight protective boards Identification
« Reply #4 on: May 01, 2022, 05:55:02 PM »
They can be hard to see as they’re not an ink stamp but they’re pressed right into the material

Special Ed

  • Hero Member
  • *****
    • View Profile
Re: Trunk taillight protective boards Identification
« Reply #5 on: May 01, 2022, 05:59:56 PM »
Its a small circle look at bottom photo upper rh  corner.

WT6066-2600

  • Full Member
  • ***
    • View Profile
Re: Trunk taillight protective boards Identification
« Reply #6 on: May 01, 2022, 06:52:48 PM »
On both blue surfaces there is a circle with some impression.  Thought it was just an abrasion.

TLea

  • Hero Member
  • *****
    • View Profile
Re: Trunk taillight protective boards Identification
« Reply #7 on: May 02, 2022, 04:42:45 PM »
On both blue surfaces there is a circle with some impression.  Thought it was just an abrasion.
Thats it. OEM

Bigblock

  • Full Member
  • ***
    • View Profile
Re: Trunk taillight protective boards Identification
« Reply #8 on: May 12, 2022, 02:30:05 PM »
The boards that were laying in the trunk in my KR have "FP" stamped into the corner on the grey side. Too fragile to try and install.