News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Trunk taillight protective boards Identification

Started by WT6066-2600, April 30, 2022, 07:38:18 PM

Previous topic - Next topic

WT6066-2600

Today's garage discovery,

Found these boards back in the 80s and stored them away.  Never knew if they might be original to 68 Shelbys.

One side is a flat black paper texture and the other side is a gray-blue somewhat smoother texture.  Also the shapes are different, one is longer and the notches at the top are spaced differently.   

Coralsnake

The original Influencer, check out www.thecoralsnake.com

TLea

Do they have a makers mark stamped into them in one of the upper corners?


TLea

They can be hard to see as they're not an ink stamp but they're pressed right into the material

Special Ed

Its a small circle look at bottom photo upper rh  corner.

WT6066-2600

On both blue surfaces there is a circle with some impression.  Thought it was just an abrasion.

TLea

Quote from: WT6066-2600 on May 01, 2022, 06:52:48 PM
On both blue surfaces there is a circle with some impression.  Thought it was just an abrasion.
Thats it. OEM

Bigblock

The boards that were laying in the trunk in my KR have "FP" stamped into the corner on the grey side. Too fragile to try and install.