News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

shock tower (cap) question

Started by hurlbird, June 14, 2022, 08:51:01 AM

Previous topic - Next topic

hurlbird

For my 70 MACH 1. The "towers" where the front shock bolt into i need to replace as i have lovely chrome reproduction ones  :-[ Is there a proper part number for the factory tower caps? this is just the top piece that accepts the shock bots. Thanks

Royce Peterson

1968 Cougar XR-7 GT-E 427 Side Oiler C6 3.50 Detroit Locker
1968 1/2 Cougar XR-7 428CJ Ram Air C6 3.91 Traction Lock


Royce Peterson

Quote from: Bob Gaines on June 14, 2022, 10:36:55 AM
Quote from: hurlbird on June 14, 2022, 09:30:34 AM
great and thanks
Keep in mind you will have to weld on the reinforcement washers to your donor "beehive" caps to make them look factory . Unlike other years (66/67 in particular) where there were sporadic times in production when the heavy duty caps were not used for whatever reason 69/70 typically had them throughout production. They would be painted black when reinforced unlike the typical zinc phosphate Dearborn caps.

Pretty sure a Mach One is not a Shelby Bob.
1968 Cougar XR-7 GT-E 427 Side Oiler C6 3.50 Detroit Locker
1968 1/2 Cougar XR-7 428CJ Ram Air C6 3.91 Traction Lock

Bob Gaines

Quote from: Royce Peterson on June 14, 2022, 10:48:43 AM
Quote from: Bob Gaines on June 14, 2022, 10:36:55 AM
Quote from: hurlbird on June 14, 2022, 09:30:34 AM
great and thanks
Keep in mind you will have to weld on the reinforcement washers to your donor "beehive" caps to make them look factory . Unlike other years (66/67 in particular) where there were sporadic times in production when the heavy duty caps were not used for whatever reason 69/70 typically had them throughout production. They would be painted black when reinforced unlike the typical zinc phosphate Dearborn caps.

Pretty sure a Mach One is not a Shelby Bob.
Thanks for the catch. I was on Shelby auto pilot .
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

hurlbird

does that change anything? same part?

shelbymann1970

Quote from: hurlbird on June 14, 2022, 12:17:00 PM
does that change anything? same part?
The shelbys had washers welded to them. Depending on your plant the caps could be painted or phosphate. Dearborn phos, Metuchin and SJ   painted. Shelbys are also painted-see pic below for washer ref.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)

hurlbird

thanks. also a very clear part number can be seen.

shelbymann1970

Quote from: hurlbird on June 14, 2022, 01:24:27 PM
thanks. also a very clear part number can be seen.
In my photo above that is my car's Vin. Mandatory when it sold new in Belgium in 1970
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)