Author Topic: 67 9" rear carrier assembly  (Read 1297 times)

Brandon

  • Jr. Member
  • **
    • View Profile
67 9" rear carrier assembly
« on: June 26, 2022, 03:46:11 PM »
Looking for a clean 67 9" carrier assembly.

1175

  • Sr. Member
  • ****
    • View Profile
Re: 67 9" rear carrier assembly
« Reply #1 on: June 26, 2022, 06:54:11 PM »
Center section only?

Preferred date?

Thanks
Jon

Brandon

  • Jr. Member
  • **
    • View Profile
Re: 67 9" rear carrier assembly
« Reply #2 on: June 28, 2022, 01:18:32 AM »
Yes on center section only.

Assume they're all coded C4AW 4025-B, open to date codes, but preferably want one that's plausible for the car.

Scode67FB

  • Full Member
  • ***
    • View Profile
Re: 67 9" rear carrier assembly
« Reply #3 on: June 28, 2022, 01:56:11 AM »

JD

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: 67 9" rear carrier assembly
« Reply #4 on: June 28, 2022, 06:29:56 AM »
Looking for a clean 67 9" carrier assembly.

Is your car a GT350 or a GT500?

Auto or 4-speed?  (Do you want the original rear gear ratio or something different?)

Do you know the San Jose build date?
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

tgilliam

  • Jr. Member
  • **
    • View Profile
Re: 67 9" rear carrier assembly
« Reply #5 on: June 28, 2022, 10:15:38 PM »
Scode67FB,
I sent you a PM.

Tom Gilliam
tom@jtgil.com

Brandon

  • Jr. Member
  • **
    • View Profile
Re: 67 9" rear carrier assembly
« Reply #6 on: June 28, 2022, 11:44:40 PM »

Is your car a GT350 or a GT500?

Auto or 4-speed?  (Do you want the original rear gear ratio or something different?)

Do you know the San Jose build date?

GT500
4-speed
Prefer 3.89
San Jose build date January 67

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: 67 9" rear carrier assembly
« Reply #7 on: June 29, 2022, 09:15:34 AM »

Is your car a GT350 or a GT500?

Auto or 4-speed?  (Do you want the original rear gear ratio or something different?)

Do you know the San Jose build date?

GT500
4-speed
Prefer 3.89
San Jose build date January 67
Just in case it matters to you your GT 500 would have had a spec case from the factory.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Brandon

  • Jr. Member
  • **
    • View Profile
Re: 67 9" rear carrier assembly
« Reply #8 on: June 29, 2022, 11:16:12 AM »
By spec case do you mean special in some way?  Or are you talking about the gears?

JD

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: 67 9" rear carrier assembly
« Reply #9 on: June 29, 2022, 11:26:44 AM »
Bob is referring to the letters "SPEC" being cast into the outside of the housing.  will look for an image...

see attached,
« Last Edit: June 29, 2022, 11:31:12 AM by JD »
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0