Author Topic: More Flat Gas Cap Emblem Adapters  (Read 1056 times)

rcgt350

  • Full Member
  • ***
    • View Profile
More Flat Gas Cap Emblem Adapters
« on: January 18, 2023, 02:58:18 PM »
I’m going to do another run of the Aluminum Flat Gas Cap Emblem Adapters, just looking to get some feedback first on interest level .
 Let me know if your needing one, two, ?
Thanks
Randy

TLea

  • Hero Member
  • *****
    • View Profile
Re: More Flat Gas Cap Emblem Adapters
« Reply #1 on: January 18, 2023, 05:31:39 PM »
Hi Randy, I’m pretty sure I have all I need but I’ve got a check one car at the other building to see if it has one or not. I will let you know

rcgt350

  • Full Member
  • ***
    • View Profile
Re: More Flat Gas Cap Emblem Adapters
« Reply #2 on: January 18, 2023, 08:20:30 PM »
Sounds good

rcgt350

  • Full Member
  • ***
    • View Profile
Re: More Flat Gas Cap Emblem Adapters
« Reply #3 on: February 03, 2023, 01:22:24 PM »
I thought there might have been a little more interest so far, I need a minimum of 6) pieces just to start the ball rolling.
If you were on the fence for a bit, now is the time.

Thanks

430dragpack

  • Sr. Member
  • ****
    • View Profile
Re: More Flat Gas Cap Emblem Adapters
« Reply #4 on: February 03, 2023, 04:37:24 PM »
At what approximate serial numbers did they stop using the flat caps?

JD

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: More Flat Gas Cap Emblem Adapters
« Reply #5 on: February 03, 2023, 04:51:17 PM »
Less than 100 cars (maybe 50 at the most) seem to have had them. 

Because of the not strict completion order at Shelby American a time of when was it fazed-out would better define the count.
« Last Edit: February 03, 2023, 04:52:51 PM by JD »
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

rcgt350

  • Full Member
  • ***
    • View Profile
Re: More Flat Gas Cap Emblem Adapters
« Reply #6 on: March 24, 2023, 05:52:01 PM »
I just received a fresh batch of the emblem adapters. If you’re thinking you need one or for a spare, now might be a good time, I got 12)yesterday and Im at 7) today. I also include the mounting hardware for your convenience.
95.00 each