Author Topic: Engine tag data  (Read 4967 times)

DRGT350

  • SAAC Member
  • Full Member
  • *
    • View Profile
Engine tag data
« on: July 30, 2018, 03:30:23 PM »
Can someone help with an engine tag data?  I tried to order a tag for my car from Marti - but since the 66 Shelby's don't have the door tag....  so I need to tell them the information on the tag  -The car was built in SJ in April of '66, SFM 6s2052 is the Shelby number...?  Appreciate in advance any help on this -

Dave

acman63

  • Hero Member
  • *****
    • View Profile
    • Shelby Parts and Restoration  since 1977
Re: Engine tag data
« Reply #1 on: July 30, 2018, 03:55:06 PM »
all you need to supply him is the date of the parts build  so get the machined date off the front of the block,  he will need to know if its a 4 speed or automatic
SAAC Concours Chairman

Owner Shelby Parts and Restoration Since 1977

SAAC original first year member

DRGT350

  • SAAC Member
  • Full Member
  • *
    • View Profile
Re: Engine tag data
« Reply #2 on: July 30, 2018, 03:58:13 PM »
thanks Jim -

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Engine tag data
« Reply #3 on: July 30, 2018, 04:58:33 PM »
Not sure that you realize but wanted to mention that your car would not have typically had an aluminum ID tag attached to the intake manifold when new.  They did have the engine ID sticker/decal though
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

kingchief

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: Engine tag data
« Reply #4 on: July 30, 2018, 06:06:07 PM »
HI! "They did have the engine ID sticker/decal though".

Can someone please post a picture of this sticker decal???

Thanks in advance.

Steve
SFM 6S406

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Engine tag data
« Reply #5 on: July 30, 2018, 06:14:14 PM »
HI! "They did have the engine ID sticker/decal though".

Can someone please post a picture of this sticker decal???

For the POs production period. Markings will differ depending on engine and trans


Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

kingchief

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: Engine tag data
« Reply #6 on: July 31, 2018, 07:22:08 AM »
Thank you for the photo. ;D

Steve
SFM 6S406

DRGT350

  • SAAC Member
  • Full Member
  • *
    • View Profile
Re: Engine tag data
« Reply #7 on: July 31, 2018, 10:52:27 AM »
Jeff -

So just the sticker on the coil and NO engine tag at all?

Dave

gt350hr

  • Hero Member
  • *****
  • Randy Gillis in real life - 5353 original posts
    • View Profile
Re: Engine tag data
« Reply #8 on: July 31, 2018, 11:30:03 AM »
  It would be very rare to find the aluminum tag on a " '66" engine. There was no place to put the tag. Some early cars did have them under a manifold bolt. but they were dropped quickly as too much trouble.
   Randy
Celebrating 46 years of drag racing 6S477 and no end in sight.

acman63

  • Hero Member
  • *****
    • View Profile
    • Shelby Parts and Restoration  since 1977
Re: Engine tag data
« Reply #9 on: July 31, 2018, 11:50:44 AM »
Ive also seen early cars (65s)  with the 554  tag under the water temp sender
SAAC Concours Chairman

Owner Shelby Parts and Restoration Since 1977

SAAC original first year member

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Engine tag data
« Reply #10 on: July 31, 2018, 01:34:50 PM »
Jeff -

So just the sticker on the coil and NO engine tag at all?

Dave

Since the OP was asking about a pretty late car that is correct. There have been a few carry over cars (especially the black intake cars) that had the tags swapped from the cast iron intake to the new one at Ford during the change over, found. Its clear to see that that/those employees got it wrong and the process corrected so from that point forward no more painted aluminum intakes and no swapping the engine ID tag over
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

gt350hr

  • Hero Member
  • *****
  • Randy Gillis in real life - 5353 original posts
    • View Profile
Re: Engine tag data
« Reply #11 on: August 01, 2018, 11:47:35 AM »
Ive also seen early cars (65s)  with the 554  tag under the water temp sender

  That procedure was carried on through the carry over production.  6S240 ( and others) had the tag there. In '66 the temp sender size was increased making it impossible to put the tag there.
  Randy
Celebrating 46 years of drag racing 6S477 and no end in sight.

21.04

  • Jr. Member
  • **
    • View Profile
Re: Engine tag data
« Reply #12 on: January 13, 2019, 06:32:24 PM »
I’m just noticing this thread and wanted to ask if the 246 engine ID sticker was typically only applied to Shelby’s or are these also found on non Shelby K codes?

Matt

acman63

  • Hero Member
  • *****
    • View Profile
    • Shelby Parts and Restoration  since 1977
Re: Engine tag data
« Reply #13 on: January 13, 2019, 08:18:03 PM »
I’m just noticing this thread and wanted to ask if the 246 engine ID sticker was typically only applied to Shelby’s or are these also found on non Shelby K codes?

Matt


all hippos had that ID   246  and I think 245  for 4 speed cars
SAAC Concours Chairman

Owner Shelby Parts and Restoration Since 1977

SAAC original first year member

gt350hr

  • Hero Member
  • *****
  • Randy Gillis in real life - 5353 original posts
    • View Profile
Re: Engine tag data
« Reply #14 on: January 14, 2019, 03:57:35 PM »
  +1 Nothing to do with SAI. All Ford engines had the paper tag. six cylinder to SOHC in '66.
Celebrating 46 years of drag racing 6S477 and no end in sight.