Author Topic: Help With Identifying Symbol on Magstar Cap  (Read 7579 times)

BGlover67

  • SAAC Member
  • Hero Member
  • *
  • Formerly "My Shelby Dream"
    • View Profile
Help With Identifying Symbol on Magstar Cap
« on: August 12, 2018, 02:05:49 PM »
No. 26 has it's original Magstar center caps with emblems, although they are currently installed on a set of reproduction rims.  Each emblem is a non-embossed snake, as would be expected on a double digit car, but they have turned silver.  On it's underside, they have a dark orangey-red adhesive (see pic).  I gently removed them to save them for prosperity sake, and noticed one cap had this symbol painted on it.  Does anyone recognize it?  Has anyone else found such thing?  Interesting that it would be there from the factory.  Perhaps it's a symbol for Kelsey Hayes?  Or it's an ancient language proving that they first 100 cars really were built by aliens?

Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #1 on: August 12, 2018, 03:00:37 PM »
I have seen it before . I always thought it was a derivative of a KH trademark. I have bought them in them in KH blister packs before.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Help With Identifying Symbol on Magstar Cap
« Reply #2 on: August 12, 2018, 04:36:50 PM »
If you rotate it 90 degrees CW its appears to be the stylized initials SR if that is a clue




Magstar used the tri-emblem as their company label/emblem. Red, white and blue with the lines that we see in the ads and on the over the counter wheels and center




Maybe the cap was made for another retail outlet
« Last Edit: August 12, 2018, 05:02:52 PM by J_Speegle »
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

67_1183

  • SAAC Member
  • Sr. Member
  • *
  • Southern Oregon - SAAC Member since 1977
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #3 on: August 12, 2018, 04:50:03 PM »
If you rotate it 90 degrees CW its appears to be the stylized initials SR if that is a clue

Did Sears & Roebuck have auto centers that sold KH wheels aftermarket?
2nd owner of 67 GT500 #1183 since September 1976

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: Help With Identifying Symbol on Magstar Cap
« Reply #4 on: August 12, 2018, 05:04:27 PM »
If you rotate it 90 degrees CW its appears to be the stylized initials SR if that is a clue

Did Sears & Roebuck have auto centers that sold KH wheels aftermarket?

Yes. Don't recall the emblem they had on their wheels but that is a possibility
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

67_1183

  • SAAC Member
  • Sr. Member
  • *
  • Southern Oregon - SAAC Member since 1977
    • View Profile
2nd owner of 67 GT500 #1183 since September 1976

papa scoops

  • Sr. Member
  • ****
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #6 on: August 12, 2018, 06:33:14 PM »
those were from wheels that were purchased from sears. also note that the orange paper was used on back of a lot of emblems as far as service parts went. not sure of purpose, it wasn't sticky and I never got it to peel off. maybe where you put adhesive? phred

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #7 on: August 12, 2018, 06:37:38 PM »
those were from wheels that were purchased from sears. also note that the orange paper was used on back of a lot of emblems as far as service parts went. not sure of purpose, it wasn't sticky and I never got it to peel off. maybe where you put adhesive? phred
That orange was the adhesive. It was dried up by the time many of the service emblems got around to being used. You had to use different additional adhesive added over the dried orange adhesive to get them to work.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Alan

  • Jr. Member
  • **
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #8 on: August 12, 2018, 06:47:54 PM »
^+1 same orange adhesive underneath gas cap emblem.
Max
‘67    0029

shelbydoug

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #9 on: August 12, 2018, 08:33:34 PM »
No. 26 has it's original Magstar center caps with emblems, although they are currently installed on a set of reproduction rims.  Each emblem is a non-embossed snake, as would be expected on a double digit car, but they have turned silver.  On it's underside, they have a dark orangey-red adhesive (see pic).  I gently removed them to save them for prosperity sake, and noticed one cap had this symbol painted on it.  Does anyone recognize it?  Has anyone else found such thing?  Interesting that it would be there from the factory.  Perhaps it's a symbol for Kelsey Hayes?  Or it's an ancient language proving that they first 100 cars really were built by aliens?

It definitely resembles some crop symbols that I have seen pictures of. Conspiracy advocates will say aliens. Trumpests will say illegal aliens.

I think the SR's were used on Sears marketed wheels in the '60s?
68 GT350 Lives Matter!

BGlover67

  • SAAC Member
  • Hero Member
  • *
  • Formerly "My Shelby Dream"
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #10 on: August 12, 2018, 09:52:17 PM »
Wow, you guys are good.  Amazing you figured out that was Sears And Roebuck.  I swear half of you should be detectives.
Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

BGlover67

  • SAAC Member
  • Hero Member
  • *
  • Formerly "My Shelby Dream"
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #11 on: August 12, 2018, 10:12:39 PM »
They even made Guitars too.

Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #12 on: August 12, 2018, 10:19:46 PM »
^+1 same orange adhesive underneath gas cap emblem.
Max
It was a common adhesive that can be seen on many of the Shelby emblems.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

JD

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #13 on: August 12, 2018, 11:24:29 PM »
Yes, Sears sold the Mag Stars as did a number of other retailers.

There were some other Kelsey Hayes center emblem designs as well...
« Last Edit: August 12, 2018, 11:26:47 PM by JD »
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

2112

  • SAAC Member
  • Hero Member
  • *
  • Fox Island, WA
    • View Profile
Re: Help With Identifying Symbol on Magstar Cap
« Reply #14 on: August 13, 2018, 01:13:27 AM »
What would the far right emblem come on? Just a non-Sears aftermarket retailer?